Reading rule: The PDF is the primary source copy. Extracted text is provided for search and accessibility and may contain line-break or character-conversion artefacts. Always verify the PDF/Gazette before relying on a word or punctuation mark.
Open official PDF copy Open extracted text
APPRENTICESHIP RULES, 1992*
In exercise of the powers conferred by, sub-section (1) of Section 37 of the Apprentices
Act, 1961 (52 of 1961) and after consulting the Central Apprenticeship Council, the
Central Government hereby makes the following rules in supersession of the
Apprenticeship Rules, 1962, except as respects things done or omitted to be done before
such supersession, namely:-
1. Short title and commencement -
(1) These rules may be called the Apprenticeship Rules, 1992.
(2) They shall come into force on the date of their publication in the Official
Gazette.
2. Definitions -
In these rules, unless the context otherwise requires:-
(1) "Act" means the Apprentices Act,1961 (52 of 1961);
(2) "Diploma Holder" means a person who holds a diploma in engineering
or technology or equivalent qualification granted by a State Board of
Technical Education, or recognized by the State Government concerned or
the Central Government.
(2A) “Diploma in non-engineering” means a person who holds a diploma in non-
engineering or equivalent qualification granted by a Board or University or
recognised by the concerned State Government or the Central Government, as
the case may be;
(3) "Engineering Graduate" means a person, who-
(a) holds a degree in engineering or technology granted by-
(i) a statutory University, or
(ii) an institution empowered to grant such degree by an Act
of Parliament;
(b) has passed the graduateship examination of professional bodies
recognized by the Central Government as equivalent to degree;
or
(c) holds the qualifications which exempt him from Sections A and
B examinations of the Institution of Engineers (India).
_________________________________________
* Vide GSR No. 188(E), dated 20th March 2001
(4) "Vocational Certificate Holder" means a person who holds a
certificate in a Vocational Course, involving two years of study after the
completion of secondary stage of school education, recognized by the All
India Council for Technical Education;
(5) "National Classification of Occupations" means the National
Classification of Occupations adopted by the Government of India,
Ministry of Labour, Directorate General of Employment and Training;
(5A) “Non-engineering graduate” means a person who holds a degree in any subject
other than engineering or technology granted by a statutory University or an
institution empowered to grant such degree by an Act of Parliament or passed
the graduateship examination of professional bodies recognised by the Central
Government as equivalent degree;
(5B) “Optional trade apprentice” means an apprentice who is not undergoing
apprenticeship training in a designated trade;
(6) "Registered Medical Practitioner" means a person whose name is entered in
the register maintained under any law for the time being in force in any
State regulating the registration of practitioners of medicine;
(7) " Sandwich Course Student" means a student undergoing a Sandwich Course
of studies at any of the technical institutions recognised for the purpose and
leading to the award of degree or diploma in engineering or technology;
(8) "Schedule" means the Schedule appended to these rules;
(9) "Standard Industrial Classification" means the Standard Industrial
Classification adopted by the Government of India, Ministry of Labour,
Directorate General of Employment and Training;
(10) All the words and expressions, not defined here in these rules, but defined in
the Act, shall have the same meaning as given to them in the said Act.
3. Standard of Education -
(1) A person shall be eligible for being engaged as a trade apprentice - if he
satisfies the minimum educational qualifications as specified in
Schedule-1.
(2) A person shall be eligible for being engaged as a Graduate or Technician or
Technician (Vocational) apprentice if he satisfies one of the minimum
educational qualifications specified in Schedule-IA:
Provided that: -
(a) no Engineering Graduate or Diploma Holder or Vocational Certificate
holder who had training or job experience for a period one year or more,
after the attainment of these qualifications shall be eligible for being
engaged as an apprentice under the Act;
(b) no Sandwich Course Student shall be eligible for being engaged as an
apprentice under the Act after passing the final examination of the technical
institution wherein such student is undergoing the course unless so
approved by the Regional Central Apprenticeship Advisers;
(c) a person who has been a Graduate or Technician or Technician
(Vocational) apprentice under the Act and in whose case the contract of
apprenticeship was terminated for any reason whatsoever shall not be
eligible for being engaged as an apprentice again under the Act without
the prior approval of the Apprenticeship Adviser.
4. Standard of Physical Fitness -
(1) A person shall be eligible for being engaged as an apprentice if he satisfies the
minimum standards of physical fitness specified in Schedule-II.
Provided that a person who has undergone institutional training
in a school or other institution recognised by or affiliated to the National
Council or the All India Council or a Statutory University or a State Board of
Technical Education and has passed the examination or tests conducted
by these bodies, or is undergoing institutional training in a school or
institution so recognised or affiliated in order that he may require a degree
or diploma in engineering or technology or certificate in vocational
course or equivalent qualification shall, if he has already undergone medical
examination in accordance with the rules for the admission to the school or
institution, be deemed to have complied with the provisions of this rule.
*Provided further that the standards of fitness specified for item (4)
relating to "EARS" and item (6) relating to “SPEECH" of schedule II
shall not apply in the case of a person who is deaf or dumb or deaf and dumb
for the following trades, namely:-
(a) Building and Furniture Trades Group:
1. Plumber
2. Carpenter.
3. Furniture and Cabinet Maker.
4 Sports Goods Maker. (Wood)
(b) Draughtsmen and Surveyors Trades Group
1. Draughtsman(Civil)
______________________________________
* Inserted vide GSR No. 338, dated 15th September 1997
(c) Printing Trades Group.
1. Process Cameraman.
2. Retoucher Lithographic.
3. Engraver.
4. Book Binder.
(d) Hotel & Catering Trades Group
1. Cook (General).
2. Cook (Vegetarian).
3. Baker and Confectioner.
(e) Cutting and Tailoring Trades Group.
1. Designer and Master Cutter.
2. Tailor (Men)
3. Tailor (Women)
4. Tailor (General)
(f) Agriculture Trades Group
1. Horticulture Assistant.
(g) Painting Trades Group
1. Painter (General).
*(h) Group No.1-Machine Shop Trades Group:
1. Fitter
2. Turner.
3. Machinist**
(i) Group No. 3- Metal Working Trades Group:
1. Sheet Metal Worker.
2. Welder (Gas and Electric)
(j) Group No.4- Electrical Trades Group
1. Wireman.
2. Electrician**
**(k). Group No. 5 -Building And Furniture Trade Group
1. Mason (Building Constructor)
(l). Group No. 10 - Heat Engines Trades Group
1. Mechanic (Diesel)
2. Mechanic Tractor
3. Mechanic (Motor Vehicle)
(m). Group No. 11 - Draughtsmen and Survey Trades Group
1. Draughtsman (Mechanical)
2. Surveyor
(n). Group No. 18 – Chemical Trades Group
1. Plastic Processing Operator
2. Instrument Mechanic (Chemical Plant)
3. Laboratory Assistant (Chemical Plant)
4. Attendant Operator (Chemical Plant)
(o). Group No. 20 –Agriculture Trades Group
1. Pump Operator cum Mechanic
(p). Group No. 21 - Leather Crafts Trades Group
1. Upholsterer
2. Leather Goods Maker
(q). Group No. 23 – Electronics Trades Group
1. Electronics Mechanic
(r). Group No. 24 – Photography Trades Group
1. Photographer
(s). Group No. 26 – Beautician Trades Group
1. Hair and Skin Carer
(t). Group No. 29 – Computer Trades Group
1. Desk Top Publishing Operator
2. Programming and Systems Administration Assistant”
** Provided further that the standards of fitness specified for item (3)
relating to “Eyes” shall not apply in the case of a person with low vision (
Low vision means a person with impairment of vision of less than 6/18 to 6/10
with best correction in the better eye or impairment of field in any one of the
following categories : i) Reduction of fields less than 50 degrees, ii)
Heminaopia with macular involvement, iii) Altitudinal defect involving lower
fields) for the following trades namely:-
(a). Group No. 1-Machine Shop Trades Group
1. Fitter
2. Turner
3. Machinist
4. Machinist (Grinder)
(b). Group No. 2 -Foundry Trade Group
1. Foundryman
(c). Group No. 3 -Metal Working Trades Group
1. Forger and Heat Treater
2. Sheet Metal Worker
3. Motor Vehicle Body Builder
(d). Group No. 4 - Electrical Trade Group
1. Electrician
2. Wireman
3. Winder (Armature)
4. Electroplater
(e). Group No. 5-Building and Furniture Trades Group
1. Carpenter
2. Plumber
3. Sports Goods Maker (Wood)
4. Furniture and Cabinet Maker
(f). Group No. 6- Maintenance Trades Group
1. Mechanic Sewing Machine
(g). Group No. 9-Refrigeration and Air Conditioning Trades Group
1. Refrigeration and Air-Conditioning Mechanic
(h). Group No. 10-Heat Engines Trades Group
1. Mechanic Diesel
2. Tractor Mechanic
3. Mechanic (Earth Moving Machinery)
4. Auto Mechanic (Two Wheeler/Three Wheeler)
(i). Group No. 14-Printing Group of Trades
1. Book Binder
(j). Group No. 15-Hotel and Catering Trades Group
1. Apprentice Food Production (General)
2. Apprentice Food Production (Vegetarian)
3. Steward
4. Baker and Confectioner
5. Hotel Clerk/Receptionist/Front Office Assistant
6. Fruit and Vegetable Processor
(k). Group No. 16-Textile Trades Group
1. Weaver
2. Knitter (Hosiery)
3. Printing Textile
(l). Group No. 19-Cutting and Tailoring Trades Group
1. Designer and Master Cutter
2. Tailor (Men)
3. Tailor (Women)
4. Tailor (General)
(m). Group No. 20-Agriculture Trades Group
1. Mechanic (Agricultural Machinery)
2. Horticulture Assistant
3. Stockman (Dairy)
4. Attendant Operator (Dairy)
5. Pump Operator cum Mechanic
(n). Group No. 21-Leather Crafts Trades Group
1. Sport Goods Maker (Leather)
2. Leather Goods Maker
3. Footwear Maker
4. Finished Leather Maker
5. Maintenance Mechanic for Leather Machinery
6. Upholsterer
(o). Group No. 25-Iron and Steel Trades Group
1. Brick Layer (Refractory)
2. Furnace Operator (Steel Industry)
3. Steel Melting Hand
(p). Group No. 26-Beautician Trades Group
1. Beautician
2. Hair Dresser
3. Health and Slimming Assistant
4. Hair and Skin Carer
(q). Group No. 28-Painting Trades Group
1. Painter (General)
( r ). Group No. 29-Computer Trades Group
1. Desk Top Publishing Operator
2. Programming & Systems Administration Assistant
(s). Group No. 30-Hi-Tech Trades Group
1. Advanced Attendant Operator (Process)
2. Operator Cum Mechanic Pollution Control Equipment
3. Mechanic Medical Equipment for Hospitals and Occupational
and Health Centres
(t). Group No. 31-Multi Skill Trades Group
1. Mechanic Advanced Machine Tool Maintenance
2. Operator Advanced Machine Tool
Provided further that the standards of fitness specified for item (11)
relating to “skeletal system” will be relaxed in the case of a Orthopadically
handicapped person for the following trades as mentioned against each trade,
namely:-
(a) Group No. 1-Machine Shop Trades Group
Fitter Lower limb partially damaged from one side
can join
Turner Lower limb partially damaged from one side
can join.
Machinist Only small finger damaged can join.
Machinist (Grinder) Only small finger damaged can join.
(b) Group No. 2 - Foundry Trades Group
Pattern Maker One upper & lower limb partially damaged can
join.
(c) Group No. 3 - Metal Working Trades Group
Welder (Gas and Electric) A person with out leg and without three
finger of one hand can be accommodated
Sheet Metal Worker Both Lower limb damaged can be
accommodated.
(d) Group No. 4 - Electrical Trades Group
Electrician Partially lower limb students can be
accommodated.
(e) Group No. 5 - Building & Furniture Trades Group
Plumber A person without one or two finger of
foot & hand can be accommodated.
Carpenter One upper & lower limb partially
damaged.
(f) Group No.6 - Maintenance Trades Group
Mechanic Maintenance (Chemical With one lower limb partially
Plant) damaged can be accommodated.
(g) Group No. 7-Precision Machining Trades Group
Tool and Die Maker (Die and Lower limb partially damaged only one
Moulds) side can be accommodated. Small finger of
each hand damaged can be accommodated.
Tool and Die Maker (Press Lower limb partially damaged only one
Tools, Jigs and Fixtures) side can be accommodated. Small finger of
each hand damaged can be accommodated.
(h) Group No. 8 - Instrument Trades Group
Mechanic Watch And Clock Both lower limbs
(i) Group No. 9- Refrigeration and Air Conditioning Trades Group
Refrigeration and Air Only one lower limb partially working can
Conditioning Mechanic be accommodated.
Small finger of each hand damaged can be
accommodated
(j) Group No. 10 - Heat Engines Trades Group
Mechanic (Diesel) Upper limb partially damaged (Little finger
and Ring Finger) can be accommodated for
both hands.
Lower limb partially damaged only one
side can be accommodated.
Tractor Mechanic Upper limb partially damaged (Little finger
and Ring Finger) can be accommodated for
both hands
Lower limb partially damaged only one
side can be accommodated.
Mechanic Motor Vehicle Upper limb partially damaged (Little finger
and Ring Finger) can be accommodated for
both hands.
Lower limb partially damaged only one
side can be accommodated
(k) Group No. 11- Draughtsmen and Surveyor Trades Group
Draughtsman (Civil) Partially without both legs or without one
leg & upper left limb damaged.
Draughtsman (Mechanical) Partially without both legs or without one
leg & upper left limb damaged.
Surveyor One lower limbs partially damaged
(l) Group No. 14-Printing Group of Trades
Offset Machine Minder One lower or one upper limb.
Process Cameraman One lower or one upper limb.
Book Binder One lower limb or both lower limbs with
artificial leg.
(m) Group No. 15-Hotel and Catering Trades Group
Baker And Confectioner One lower or one upper limb.
(n) Group No. 18- Chemical Trades Group
Instrument Mechanic With one lower limb partially damaged can
(Chemical Plant) be accommodated.
Maintenance Mechanic With one lower limb partially damaged can
(Chemical Plant) be accommodated.
Attendant Operator With one lower limb partially damaged can
(Chemical Plant) be accommodated.
Laboratory Assistant With one lower limb partially damaged can
(Chemical Plant) be accommodated.
Plastic Processing Operator One lower limb partially damaged.
(o) Group No. 20-Agriculture Trades Group
Pump Operator Cum Mechanic Upper limb partially damaged (Little
finger and Ring Finger can be
accommodated for both hands.
Lower limb partially damaged only one
side can be accommodated.
Mechanic Agricultural Upper limb partially damaged (Little
Machinery finger and Ring Finger can be
accommodated for both hands.
Lower limb partially damaged only one
side can be accommodated.
Lower limb partially damaged from one
side.
(p) Group No. 21- Leather Crafts Trades Group
Leather Goods Maker One lower or one upper limb.
Upholsterer Both lower limbs
(q) Group No. 23-Electronics Trades Group
Electronics Mechanic Without legs or leg.
(r) Group No. 26 - Beautician Trades Group
Hair and Skin Carer Partially without one lower limb &
one/two lower limbs totally damaged can
be adjusted.
(s) Group No. 28 – Painting Trades Group
Painting General One upper & lower limb partially
damaged.
(t) Group No. 29 - Computer Trades Group
Desk Top Publishing Operator Both lower limbs
Programming and Systems Both lower limbs
Administration Assistant”
(2) Without prejudice to the generality of the foregoing provision where a physically
handicapped person registered at any Employment Exchange is declared, by either the
medical board attached to Special Employment Exchanges. for the physically
handicapped or the local Civil Surgeon (where such Medical Board has not been
constituted) to be physically fit for being engaged as an apprentice in any of the
designated trades under the Apprentices Act, 1961, he may be engaged as an
apprentice in that trade.
5. Reservation of Training Places:-
(1) In respect of each of the states specified in column (2) of the Schedule-IIA
training places shall be reserved by the employer for the Schedule Castes
and Scheduled Tribes in every designated trade so that the ratio of the
apprentices belonging to the Scheduled Castes and Scheduled Tribes to the
total number of apprentices in such designated trade or trades shall be
specified in columns (3) and (4) of the said Schedule (and where there is more
than one designated trade in an establishment such training places shall be
reserved also on the basis of total number of apprentices in all designated
trades in such establishments).
Provided that when the prescribed number of persons belonging either
to the Scheduled Castes or to the Scheduled Tribes are not available, the
training places so reserved for them may be filled by persons belonging to
the Scheduled Tribes or as the case may be, to the Scheduled Caste and if the
prescribed training places can not be filled even in the above given manner,
then the training places so lying unfilled may be filled by persons not
belonging to the Scheduled Castes or the Scheduled Tribes.
____________________________________________
* Inserted vide GSR No. 107, dated 27th May 1998
** Inserted vide GSR No. 300, dated 23rd August 2003
2. The training places for the Other Backward Classes in designated trades shall
be reserved by the employer according to the prescribed norms followed in the
respective State or Union territory and if training places can not be filled from
the Other Backward Classes, then the training places so lying unfilled may be
filled by persons not belonging to the Other Backward Classes.
6. Registration of Contract of Apprenticeship:-
1(a) The Central Government may specify model contract form for all apprentices;
(b) The model contract form as may be specified by the Central Government
with such variation as the circumstances of each case may require, be used
for the respective purposes therein mentioned.
(2) The obligation of the employer and that of the trade apprentice shall be as
specified in Schedule-V. The terms and conditions in respect of graduate,
technician and technician (vocational) apprentices shall be as specified in
Schedule-VI.
7. Period of Apprenticeship Training -
(1) The period of apprenticeship training in the case of trade apprentices
referred to in clause (a) clause (aa) and clause (b) of Section 6 of the Act shall
be as specified in Schedule-I.
(1A) The period of apprenticeship training in the case of trade apprentices referred
to in clause (aa) of section 6 of the Act, shall be as specified in Schedule-I-B.
(2)(a) Where a trade apprentice is unable to complete the full apprenticeship course
within the periods prescribed in sub-rule (1) or to take the final test owing to
illness or other circumstances beyond his control, the establishment
concerned shall extend the period of his apprenticeship until he completes
the full apprenticeship course and the next test is held if so required by
the Apprenticeship Adviser, Similar extension of the period of training may
also be allowed in the case of those trade apprentices who having completed
the course, fail in the final test. A trade apprentice who fails in the second
test shall not be allowed any extension of the period of training.
(b) (i) Where a trade apprentice is unable to complete the period of
apprenticeship training due to strike or lockout or layoff in an
establishment where he is undergoing training and is not instrumental for the
same, the period of his apprenticeship training shall be extended for a period
equal to the period of strike or lockout or layoff , as the case may be, and he
shall be paid stipend during the period of such strike or lockout or layoff or
for a maximum period of six months, whichever is less;
(ii) If the strike or lockout or layoff is likely to continue for a longer
period, the employer shall follow the procedure for novation of contract of
apprenticeship of a trade apprentice referred to in clause (i) with the other
employer as specified in section 5 of the Act.
(2) In the case of trade apprentices other than those covered by clause (a) of
section 6 of the Act, the first six months of the period of training shall be
treated as period of probation.
3A(1)* Keeping in view seasonality in operation or business or flexibility desired by
trade apprentice, a trade apprentice may complete his period of
apprenticeship training within five years or double the duration of
apprenticeship training whichever is less from the date of starting of his
apprenticeship training.
(2) The flexibility referred to in sub-rule(1) shall be permissible in the
following manner, namely:-
(a) Maximum one break for trades having duration two years or less than
two years;
(b) Maximum two breaks for trades having duration more than two years.
(3) The start and end date of his apprenticeship training shall be reported on
portal-site by the employer.
(4)(a) The period of apprenticeship training in the case of Engineering Graduates,
Diploma holders and Vocational Certificate holders shall be one year.
(b) In the case of Sandwich Course Students, the period of practical training they
undergo as part of apprenticeship course of studies shall be the period of
apprenticeship training.
(c) Where a Graduate/Technician/Technician (Vocational) Apprentice is
unable to complete the period of Apprenticeship Training due to
strike/lockout/ layoff in as establishment where he is undergoing training and
is not instrumental in the same, the period of his Apprenticeship Training
would be extended equal to the period of strike/ lockout/ layoff and he
shall be paid stipend during the period of such strike/ lock out / layoff or
for a maximum period of six months whichever is less.
(d) If the strike/lock out/ lay off is likely to continue for a longer period, the
employer shall follow the procedure for novation of contract of
apprenticeship for the apprentices referred to in clause (c) with the other
employer as specified in section 5 of the Act.
[7A** Regulation of optional trade.-
(1). A person shall not be qualified for being engaged as an apprentice to undergo
apprenticeship training in any optional trade, unless he-
(a) is not less than fourteen years of age, and for optional trades related to
hazardous industries, not less than eighteen years of age; and
(b) satisfies such physical fitness as determined by the employer.
(2) The minimum educational qualification for person to undergo apprenticeship
training in optional trade shall be fifth class pass from a recognised school.
(3) The period of apprenticeship training in the case of non-engineering graduates,
diploma in non-engineering and vocational certificate holder shall be
maximum one year and the period of apprenticeship training for other
apprentices undergoing apprenticeship training in optional trade shall be
minimum of six months and maximum of two years.
(4) The training places shall be reserved by the employer for the Scheduled Castes
and the Scheduled Tribes in every optional trade in accordance with the sub-
rule (1) of rule 5 and Schedule-IIA of said rule.
(5) The training places for the Other Backward Classes shall be reserved by the
employer in every optional trade in accordance to the sub-rule (2) of rule 5.
(6) It shall be obligatory on the part of employer to disclose the duration and
syllabi of the optional trades on the portal-site.
(7) The work diary in Format-2 as specified in Schedule-III shall be maintained
by each apprentice and countersigned by his supervisor once in a week.
(8) Weekly hours of work provided in sub-rule (3) of rule 12 shall be applicable
for those apprentices possessing a degree of three or four years after
secondary or higher secondary education or diploma of three years after 10th
class or diploma of two years after 12th pass or a certificate in vocational
course involving two years of study after completion of secondary stage of
school education and undergoing apprenticeship training in optional trade and
for all other apprentices undergoing apprenticeship training in optional trade,
the weekly hours of work provided in sub-rule (1) and (2) of rule 12 shall be
applicable.
(9) No person shall be engaged as an apprentice to undergo apprenticeship
training in optional trade unless such person or, if he is minor, his guardian
has entered into a contract of apprenticeship with the employer and such
contract of apprenticeship shall be uploaded on portal-site by the employer.
(10) The minimum rates of stipend prescribed for graduate apprentices shall be
paid by the employer to those apprentices who possess a degree of minimum
three years duration after 10+2 system of education.
(11) The minimum rates of stipend prescribed for technician apprentices shall be
paid by the employer to those apprentices who possess a diploma of three
years after 10th class or diploma of two years after 12th pass.
(12) The minimum rates of stipend prescribed for technician (vocational)
apprentices shall be paid by the employer to those apprentices who possess a
certificate in vocational course involving two years of study after completion
of secondary stage of school education.
(13) The minimum rates of stipend prescribed for trade apprentices shall be paid by
the employer to other apprentices undergoing training in optional trade
according to their period of apprenticeship training.
(14) Every apprentice possessing a degree of minimum three years or a diploma of
three years after 10th class or diploma of two years after 12th pass or a
certificate in vocational course involving two years of study after completion
of secondary stage of school education and undergoing apprenticeship training
in optional trade shall follow the terms and conditions of contract of
apprenticeship for graduate, technician and technician(vocational) apprentices
as provided in Schedule-VI.
(15) Every employer and other apprentices undergoing training in optional trade
shall have the obligations as provided in Schedule-V respectively.
(16) The employer shall not run a trade as optional which is a designated trade
under the Act.
(17) The progress in apprenticeship training of every apprentice in optional trade
shall be assessed by the employer from time to time and every apprentice who
completes his apprenticeship training to the satisfaction of the employer shall
be granted a certificate of proficiency by that employer.
7B Number of apprentices for designated and optional trade.-
(1) The employers having six or more workers shall only be eligible to engage
apprentices and engagement of apprentices by establishment having number of
workers not exceeding forty shall not be obligatory.
(2) The strength of workers shall be calculated on the basis of average strength in
the preceding financial year.
(3) Within a financial year, each establishment shall engage apprentices in a band
of 2.5 per cent. to 10 per cent. of the total strength of the establishment
including contractual staff.
(4) In no month, number of apprentices should be less than 2 per cent. of the total
strength of the establishment and more than 15 per cent. of the total strength of
the establishment subject to the condition that he shall fulfill apprentice months
corresponding to 2.5 per cent. obligation in a financial year.
(5) Every employer shall disclose their intention of engagement of apprentices both
in designated and optional trade on portal site as well as establishment’s portal-
site (if existing) as per quarters given below:-
(a) the 1st April to the 30th June;
(b) the 1st July to the 30th September;
(c) the 1st October to the 31st December;
(d) the 1st January to the 31st March..
7C Inspection of establishment.-
An Officer not below the rank of Assistant Apprenticeship Adviser shall inspect an
establishment and such inspection shall be after prior approval of the Central or the
State Apprenticeship Adviser, as the case may be].
8* Compensation for termination of apprenticeship:
Where the contract of apprenticeship is terminated through failure on the part of any
employer in carrying out the terms and conditions thereof, such employer shall be
liable to pay the apprentice compensation of an amount equivalent to his three
months last drawn stipend.
9. Qualifications of persons placed in charge of the training of apprentices:-
A person placed in charge of the training of apprentices by the employer shall
possess the qualifications specified in Schedule IV to these rules.
The person so appointed shall be of the appropriate level commensurate with the
number of seats located for apprenticeship training and size of the establishment.
9** a Staffing pattern and qualifications of instructional staff for practical
and basic training of apprentices
Staffing pattern and qualifications of instructional staff for imparting practical and
basic training to apprentices shall be as specified in Schedule IV A
10. Maintenance of record of work by apprentices:-
Every Graduate or Technician or Technician (Vocational) Apprentice shall
maintain a daily record of the work done by him relating to the apprenticeship training
in the form of a workshop or laboratory note book.
__________________________________________________
*
Substituted vide GSR No. 404, dated 25th November 1997
**
Inserted vide GSR No. 190(E) dated 26th February, 1999
*11. Payment of stipend to apprentices:-
(1) The minimum rate of stipend per month payable to trade apprentices shall be
follows, namely:-
(a) During the first year of : Seventy per cent. of minimum wage of
training semi-skilled workers notified by the
respective State or Union territory
(b) During the second year of : Eighty per cent. of minimum wage of semi-
training skilled workers notified by the respective
State or Union territory
(c) During the third and fourth : Ninety per cent. of minimum wage of semi-
year of training skilled workers notified by the respective
State or Union territory:
Provided that in the case where the minimum rate of wage for a trade is not
notified by the State Government or Union territory, then, the maximum of minimum
wages of the Scheduled Employment notified by such State Government or Union
territory for semi-skilled workers shall be taken into account for paying the stipend in
respect of that trade:
Provided further that in the case of trade apprentices referred to in clause
(a) of section 6 of the Act, the period of training already undergone by them in a
school or other institution recognised by the National Council, shall be taken into
account for the purpose of determining the rate of stipend payable”.
(2)** The minimum rates of stipend payable to Graduate, Technician and
Technician (Vocational) Apprentices shall be as follows namely:-
a. Graduates Apprentices Rs. 4984/-per month
b. Sandwich course Rs.3542/-per month.
(Students from Degree institutions)
c. Technician Apprentices Rs.3542/-per month
d. Sandwich course Rs.2890/-per month.
(Students from Diploma institutions)
e. Technician (Vocational) Apprentices. Rs.2758/-per month.
3. The stipend for a particular month shall be paid by the tenth day of the
following month and the stipend shall be paid through the bank account of
apprentices.
______________________________________________________________
* Substituted by GSR No. 680(E), dated 22nd September, 2014
** Substituted by GSR No. 910(E), dated 23rd December, 2014
(4) No deduction shall be made from the stipend for the period during which an
apprentice remains on casual leave or medical leave. Stipend shall, however, not be
paid for the period for which an apprentice remains on extraordinary leave.
(5) Notwithstanding anything contained in this rule, where an establishment has a
system of deferred payment whereby only a portion of the stipend is paid to the
apprentice every month and the balance is paid to the apprentice on the
completion of training such establishment shall be free to continue such system
provided that the minimum amount paid to the apprentices every month shall not be
less than the monthly stipend prescribed under these rules and no deduction is
made from the said accumulated amount on any account. Establishments which do
not already have such a system shall be free to institute a system on the same
conditions.
(6) The continuance of payment of stipend to an apprentice shall be subject to the work
and conduct of the apprentice being satisfactory.
(7) Where the work and conduct of the apprentice is not satisfactory, the employer
shall report the matter to the Apprenticeship Adviser and with his consent may
stop the continuance of payment of stipend to the apprentices.
Provided that the stipend of an apprentice shall not be stopped without
intimating him the grounds thereof and giving him an opportunity of representing
against the action proposed.
(8) On report being made by the employer under sub-rule (7) the Apprenticeship
Adviser shall give his decision thereon within thirty days of the receipt of the report
and where the Apprenticeship Adviser does not communicate to the employer refusal
to consent to the stopping of the payment of stipend within the period of thirty days,
it shall be deemed that he has consented to the stopping of the stipend
12. Hours of work:-
(1) The weekly hours of work of a trade apprentice undergoing practical training
shall be as follows, namely:-
(a) The total number of hours per week shall be 42 to 48
hours (including the time spent on Related Instruction)
(b) Trade apprentices undergoing basic training shall ordinarily work
for 42 hours per week including the time spent on Related Instruction.
(c) Trade apprentices during the second year of apprenticeship shall
work for 42 to 45 hours per week including the time spent on
Related Instruction.
(d) Trade apprentice during the third and subsequent years of
apprenticeship shall work for the same number of hours per week as
the workers in the trade in the establishment in which the trade
apprentice is undergoing apprenticeship training.
(2) No trade apprentice shall be engaged on such training between the hours
of 10.00 p.m. to 6.00 a.m.. except with the prior approval of the
Apprenticeship Adviser who shall give his approval if he is satisfied that it is
in the interest of the training of the trade apprentice or in public interest.
(3) Graduate, Technician and Technician (Vocational ) Apprentices shall work
according to the normal hours of work of the department in the
establishment to which they are attached for training.
13*. Grant of leave to apprentices
14**. Record and returns
(1) A contract of apprenticeship as entered between an apprentice and the
employer as per Format-1 specified in Schedule III shall be forwarded on the
portal-site by the employer for registration.
(2) Work dairy in Format – 2 as specified in Schedule III shall be maintained by
each Trade apprentice and Optional trade apprentice and countersigned by his
supervisor once in a week.
(3) Every employer shall maintain a register of attendance of the
apprentices undergoing apprenticeship training in his establishment and
action taken for irregular and unauthorised absence shall be recorded in
the said register at the end of each month.
(4) Every employer shall maintain a record of the work done and training
undertaken by the graduate, technician and technician (vocational)
apprentices engaged in his establishment, for each quarter and at the end
of each quarter shall send a report in Form Apprenticeship specified in
Schedule-III to the Director, Regional Board of Apprenticeship Training
concerned.”
________________________________________________
* Omitted vide GSR No. 502(E) dated 18th June, 2015
** Substituted vide GSR No. 63(E) dated 20th January, 2017
List of Designated Trades under the Apprentices Act, 1961
SCHEDULE – I
[ See rule 3 (1) and rule 7 (1)]
Sl. No. Designated N.C.O. Code Period of National Council for Rebate allowed Essential/ Desirable
Trades No. Apprenticeship Vocational Training in Educational
Training approved trades or State Apprenticeship Qualifications
Council for Vocational Training
Training approved trades or
Apprenticeship trades
1 2 3 4 5 6 7
Group No.1 – Machine Shop Trades Group:
1. Fitter 7233.10, 7233.20 Two years 1. Fitter One year Passed 10th class
examination with
Science and
Mathematics under
10+2 system of
education or its
equivalent.
2. Turner 8211.15 Two years 1. Turner One year Passed 10th class
examination with
Science and
Mathematics under
10+2 system of
education or its
equivalent.
3. Machinist 8211.10,8211.15 Two years 1. Machinist One year Passed 10th class
8211.22,8211.28 examination with
8211.30,8211.32 Science and
8211.36,8211.38 Mathematics under
10+2 system of
education or its
equivalent.
4. Machinist 7224.10, 7224.30 Two years 1. Machinist (Grinder) One year Passed 10th class
(Grinder) 7224.40, 7224.45 examination with
8211.15 2. Machinist One year Science and
Mathematics under
3. Turner One year 10+2 system of
education or its
equivalent.
Group No.2 – Foundry Trades Group:
1. Pattern Maker 7522.1000 Two years 1. Carpenter Three months Passed 8th class
Examination under
2. Pattern Maker Three months 10+2 system of
education or its
equivalent.
2. Foundryman 7211.50, 8123.10 Two years 1. Foundryman One year Passed 10th class
examination with
Science and
Mathematics under
10+2 system of
education or its
equivalent.
Group No.3 – Metal Working Trades Group:
1. Forger and Heat 7221.50,7223.30 Two years --- --- Passed 10th class
Treater 8152.75,8152.90 examination under
10+2 system of
education or its
equivalent.
2. Sheet Metal 7213.10,7213.30 Two years 1. Sheet Metal Worker One year Passed 8th class
Worker 7213.90,8211.61 examination from a
recognised school.
3. Welder (Gas & 7212.10,7212.20 One year and 1. Welder Three months Passed 8th class
Electric) 7212.40,7212.50 three months examination from a
7212.65 recognised school.
4. Motor Vehicle 7422.25 7422.30 Two years 1. Sheet Metal Worker One year Passed 10th class
Body Builder 2. Welder One year examination under
10+2 system of
education or its
equivalent.
Group No.4 –Electrical Trades Group:
1. Electrician 7137.10,7241.20 Two years 1. Electrician One year Passed 10th class
examination with
Science and
Mathematics under
10+2 system of
education or its
equivalent.
2. Lineman 7245.10 Two years 1. Wireman One year Passed 8th class
examination from a
2. Electrician One year recognised school.
3. Wireman 7137.20 Two years 1. Wireman One year Passed 8th class
examination from a
2. Electrician One year recognised school.
4. Mechanic Auto 7241.10,7241.70 Two years 1. Mechanic Auto Electrical One year Passed 10th class
Electrical and and Electronics examination under
Electronics 10+2 system of
education or its
equivalent.
5. Electrician 7241.60 Two years 1. Electrician One year Passed 10th class
Aircraft examination under
10+2 system of
education or its
equivalent.
6. Electrical 7241.40 Two years 1. Electrician One year Passed 10th class
Winder examination under
10+2 system of
education with Science
and Math as a subject
or its equivalent.
7. Cable Jointer 7245.20 Two years 1. Wireman One year Passed 8th class
examination from a
2. Electrician One year recognised school.
8. Electrician 851.15 Three years Electrician Two years Passed 10th class
(Mines) examination under
10+2 system of
education with Science
(Physics and
Chemistry) as one of
subject or its
equivalent.
9. Electroplater 8223.10 Two years 1. Electroplater One year Passed 10th class
examination under
10+2 system of
education or its
equivalent.
Group No.5 – Building and Furniture Trades Group:
1. Carpenter 7124.10,7124.20 Two years 1. Carpenter One year Passed 8th class
examination from a
recognised school.
2. Plumber 7136.10,7136.30 Two years 1. Plumber One year Passed 10th class
examination under
10+2 system of
education or its
equivalent.
3. Mason 7122.20 Two years 1. Mason Building One year Passed 8th class
(Building Constructor examination under
Constructor) 10+2 system of
education or its
equivalent.
4. Furniture and 812.10, 812.20 Three years Carpenter One year Passed 8th class
Cabinet Maker examination under
10+2 system of
education with science
as subject or its
equivalent.
‘Desirable’:- Passed in
10th class examination
under 10+2 system of
education with Science
as one of the subject or
its equivalent.
5. Sports Goods 819.70 Two years Sports Goods Maker One year Passed 8th class
Maker (Wood) (Wood) examination under
10+2 system of
education or its
equivalent.
6, Mechanic (Lift 8333.70 Two years 1. Mechanic (Lift and One year Passed 10th class
and Escalator) Escalator) examination under
10+2 system of
2. Lift Mechanic One year education or its
equivalent.
7. Building 3112.90 One year and 1. Mason (Building Three months Passed 10th class
Maintenance three months Constructor) examination under
Technician 10+2 system of
2. Building maintenance Three months education with Science
and Mathematics or its
equivalent.
8. Architectural 3118.10 Two years 1. Architectural Assistant One year Passed 10th class
Assistant examination under
10+2 system of
education or its
equivalent.
9. Sanitary 7136.10 One year and 1. Sanitary Hardware Fitter Three months Passed 8th class
Hardware Fitter three months examination from a
2. Plumber Three months recognised school.
10. Interior 3471.10 Two years 1. Interior Design and One year Passed 10th class
Designer and Decoration examination under
Decorator 10+2 system of
education or its
equivalent.
Group No.6 – Maintenance Trades Group:
1. Mechanic 8281.55,8281.10 Two years 1. Mechanic Machine Tool One year Passed 10th class
Machine Tool Maintenance examination under
Maintenance 10+2 system of
education or its
equivalent.
2. Mechanic 845.63 Three years Fitter One year Passed 10th class
Maintenance examination under
(Textile 10+2 system of
Machinery) education with Science
(Physics and
Chemistry) as subjects
or its equivalent.
3. Maintenance 8159.79 Two years 1. Maintenance Mechanic One year Passed 10th class
Mechanic (Chemical Plant) examination with
(Chemical Science and
Plant) Mathematics under
10+2 system of
education or its
equivalent.
4. Mechanic 845.55 Three years 1. Fitter One year Passed 10th class
(Dairy examination under
Maintenance) 2. Tool & Die Maker One year 10+2 system of
education with Science
3. Refrigeration and Air- One year and Math as subjects or
conditioning Mechanic its equivalent.
5. Mechanic 945.82 One year Fitter Six months Passed 10th class
Sewing examination under
Machine 10+2 system of
education or its
equivalent.
6. Mechanic 845.60 Three years Fitter One year Passed 10th class
(Mining examination under
Machinery) 10+2 system of
education with Science
(Physics and
Chemistry) as subjects
or its equivalent.
7. Material 9333.10 Two years 1. Mechanic Machine Tool One year Passed 10th class
Handling Maintenance examination under
Equipment 10+2 system of
Mechanic-cum- education or its
Operator equivalent.
Group No.7 – Precision Machining Trades Group:
1. Tool and Die 7222.50,7222.60 Two years 1. Tool and Die Maker (Dies One year Passed 10th class
Maker (Dies 7211.10,7211.50 and Moulds) examination with
and Moulds) Science and
2. Tool and Die Maker One year Mathematics under
(Press Tools, Jigs and 10+2 system of
Fixtures) education or its
equivalent.
3. Machinist One year
2. Tool and Die 7222.20,7222.30 Two years 1. Tool and Die Maker One year Passed 10th class
Maker (Press 7222.50,8211.10 (Press Tools, Jigs and examination with
Tools, Jigs and 8211.15,8211.22 Fixtures) Science and
Fixtures) 8211.30,8211.38 Mathematics under
8211.55,8211.70 2. Tool and Die Maker (Dies One year 10+2 system of
and Moulds) education or its
equivalent.
3. Machinist One year
3. Plastic Mould 7222.50,8232.65 Two year 1. Tool and Die Maker (Dies One year Passed 10th class
Maker and Moulds) examination with
Science and
2. Tool and Die Maker One year Mathematics under
(Press Tools, Jigs and 10+2 system of
Fixtures) education or its
equivalent.
Group No.8 – Instrument Trades Group:
1. Instrument 7311.10,7311.30 Two years 1. Instrument Mechanic One year Passed 10th class
Mechanic 7311.60,7311.90 examination under
10+2 system of
education or its
equivalent.
2. Mechanic 7311.10,7311.67 Two years 1. Instrument One year Passed 10th class
Instrument Mechanic examination under
Aircraft 10+2 system of
education or its
equivalent.
3. Mechanic 841.10 Three years Mechanic Watch and Clock Two years Passed 10th class
Watch and examination under
Clock 10+2 system of
education or its
equivalent.
Group No.9 – Refrigeration and Air-Conditioning Machine Shop Trade Group:
1. Mechanic 845.706 Two years 1. Mechanic Refrigeration One year Passed 10th class
Refrigeration and Air Conditioning examination under
and Air 10+2 system of
Conditioning education or its
equivalent.
Group No.10 – Heat Engines Trades Group:
1. Mechanic 7231.10 Two years 1. Mechanic (Motor One year Passed 10th class
(Motor Vehicle) Vehicle) examination with
Science and
Mathematics under
10+2 system of
education or its
equivalent.
2. Mechanic 7233.24 Two years 1. Mechanic Diesel One year Passed 10th class
Diesel examination under
10+2 system of
education or its
equivalent.
3. Mechanic 7231.10 Two years 1. Mechanic Tractor One year Passed 10th class
Tractor examination under
10+2 system of
education or its
equivalent.
4. Mechanic Earth 735.41 Two years --- ---- Passed 10th class
Moving examination under
Machinery 10+2 system of
education or its
equivalent.
5. Mechanic 845.14 Three years Mechanic Diesel One year Passed 8th class
(Marine Diesel) examination or its
equivalent.
6. Driver-cum- 8322.10 One year and 1. Driver-cum- Mechanic Three months Passed 10th class
Mechanic three months (Light Motor Vehicle) examination under
(Light Motor 10+2 system of
Vehicle) education or its
equivalent.
7. Mechanic 7122.20 One year and 1. Mechanic Motor Cycle Three months Passed 10th class
Motor Cycle three months examination under
2. Mechanic Repair and Three months 10+2 system of
Maintenance of two education or its
wheeler equivalent
8. Construction 7233.28 Two years 1. Mechanic(Motor Vehicle) One year Passed 10th class
Machinery 7233.30 examination of 10+2
Mechanic-cum- 7233.90 system of education or
Operator 8332.00 its equivalent.
9. Mechanic 7231.10 Two years 1. Mechanic Repair and One year Passed 10th class
Repair and Maintenance of Light examination under
Maintenance of Vehicle 10+2 system of
Vehicle education or its
2. Mechanic Repair and One year equivalent.
Maintenance of Heavy
Vehicle
10 Technician 8281.65,8281.70 Two years 1. Fitter One year Passed 10th class
(Automotive examination with
Manufacturing) 2. Automotive One year Science and
Manufacturing Mathematics under
10+2 system of
education or its
equivalent.
11 Marine Engine 7233.22 Two years 1. Marine Engine Fitter One year Passed 10th class
Fitter examination with
Science and
Mathematics under
10+2 system of
education or its
equivalent.
Group No.11 – Draughtsman and Survey Trades Group:
1. Draughtsman 3118.20,3118.50 Two years 1. Draughtsman (Civil) One year Passed 10th class
(Civil) examination under
10+2 system of
education or its
equivalent.
2. Draughtsman 3118.40 Two years 1. Draughtsman (Mechanical) One year Passed 10th class
(Mechanical) examination with
Science and
Mathematics under
10+2 system of
education or its
equivalent.
3. Surveyor 2148.20 3112.30 Two years 1. Surveyor One year Passed 10th class
3112.40 examination under
10+2 system of
education or its
equivalent.
Group No.12 – Construction Trades Group:
1. Fitter structural 7214.70 Two years 1. Fitter One year Passed 10th class
examination with
Science and
Mathematics under
10+2 system of
education or its
equivalent.
Group No.13 – Power Plant Trades Group:
1. Boiler 8162.20 Two years --- --- Passed 10th class
Attendant examination with
Science and
Mathematics under
10+2 system of
education or its
equivalent.
2. Steam Turbine- 8161.30 Two years --- --- Passed 10th class
cum-Auxiliary examination under
Plant Operator 10+2 system of
education or its
equivalent.
3. Switch Board 8161.50 Two years --- --- Passed 10th class
Attendant examination under
10+2 system of
education or its
equivalent.
Group No.14 – Printing Trades Group:
(i) Type Setting Group:
1. Lino Operator 922.10 Three years Hand Compositor One year Passed 10th class
examination under
10+2 system of
education with
proficiency in English
and any regional
language or its
equivalent.
2. Mono Keyboard 922.20 Three years Hand Compositor One year Passed 10th class
Operator examination under
10+2 system of
education with
proficiency in English
and any regional
language or its
equivalent.
3. Mono Castor 922.30 Two years Hand Compositor One year Passed 10th class
Operator examination under
10+2 system of
education with
proficiency in English
and any regional
language or its
equivalent.
(ii) Photo Mechanic Group
1. Process 926.10 Three years --- --- Passed 10th class
Cameraman examination with
Physics and Chemistry
as subject under 10+2
system of education or
its equivalent.
2. Retoucher 925.10 Three years --- --- Passed 10th class
Lithographic examination with
Physics and Chemistry
as subject under 10+2
system of education or
its equivalent.
3. Engraver 926.50 Three years --- --- Passed 10th class
examination with
Physics and Chemistry
as subject under 10+2
system of education or
its equivalent.
(iii) Binding Group
1. Book Binder 927.10 Two years Book Binder One year Passed 8th class
examination under
10+2 system of
education or its
equivalent.
(iv) Litho Offset Group
1. Plate Maker 926.40 Two years --- --- Passed 10th class
(Lithographic) examination under
10+2 system of
education with Physics
and Chemistry as
subject or its
equivalent.
2. Offset Machine 923.50, 923.60 Three years --- --- Passed 10th class
Minder examination under
10+2 system of
education with Physics
and Chemistry as
subject or its
equivalent.
Group No.15 – Hotel and Catering Trades Group:
1. Food 1217 Two years 1. Food Production One year Passed 8th class
Production (General) examination or its
(General) equivalent.
2. Food 520.20 Two years 1. Food Production One year Passed 10th class
Production (Vegetarian) examination under
(Vegetarian) 10+2 system of
education or its
equivalent.
3. Steward 5123.40 One year and 1. Catering and Hospitality Three months Passed 10th class
three months Management examination under
10+2 system of
education or its
2. Food and Beverages Three months
equivalent.
Services Assistant
4. Baker and 777.10 Two years Baker and Confectioner Six months Passed 10th class
Confectioner examination under
10+2 system of
education or its
equivalent.
5. House Keeper 5121.10 One year and 1. House Keeper Three months Passed 10th class
(Hotel) three months examination under
2. Domestic House Keeping Three months 10+2 system of
education or its
equivalent.
3. Corporate Housekeeping Three months
4. Institution House Keeping Three months
6. Receptionist/ 3431.30,4221.10 One year and 1. Front Office Assistant Three months Passed 10th class
Hotel Clerk/ 4221.20 three months examination under
Front Office 10+2 system of
education or its
Assistant
equivalent.
7. Fruit and 775.90 Two years Preservation of Fruit and One year Passed 10th class
Vegetable Vegetables examination under
Processor 10+2 system of
education with Science
as one of the subjects
or its equivalent.
8. House Keeper 5121.20 One year Domestic House Keeping Six months Passed 10th class
(Domestic) examination under
10+2 system of
education or its
equivalent.
9. House Keeper 5121.35 One year and Hospital House Keeping One year Passed 10th class
(Hospital) six months examination under
10+2 system of or its
equivalent
10. House Keeper 5121.10 One year Institution House Keeping Six months Passed 10th class
(Institution) examination under
10+2 system of
education or its
equivalent.
11 House Keeper 5121.10 One year Corporate House Keeping Six months Passed 10th class
(Corporate) examination under
10+2 system of
education or its
equivalent.
12. Cabin/Room 5121.70 One year Cabin/Room Attendant Six months Passed 10th class exam.
Attendant under 10+2 system of
education or its
equivalent.
13. Brew Master 7137.10 Six Months ---- ---- Passed 12th class
examination under
10+2 system of
education or its
equivalent.
Group No.16 – Textile Trades Group:
1 Weaver 755.50 Six months --- --- Passed 8th class under
10+2+3 system of
education or two class
below matriculation
examination or its
equivalent.
Desirable- Passed 10th
class examination
under 10+2 system of
education or its
equivalent.
2 Doffer-cum- 752.65,752.40 Six months --- --- Passed 8th class or its
Piecer equivalent.
3. Tenter 752.10, 752.15, Six months --- --- Passed 8th class or its
(Drawing 752.20 equivalent.
Speed/ Fly
Frames)
4 Winder 752.70 Six months --- --- Passed 8th class or its
(Textile) equivalent.
5 Knitter 757.10, 757.15, One year and --- --- Passed 10th class
(Hosiery) 757.20, 757.25, six months examination under
757.30 10+2 system of
education or its
equivalent.
6 Printing Textile 758.30, 758.32, Six months --- --- Passed 8th class
758.34 examination under
10+2 system of
education.
7 Creel Boy-cum- 753.40, 753.50 Six months --- --- Passed matriculation or
Warper 10th class examination
under 10+2 system of
education or its
equivalent.
Group No.17 – Mining Trades Group:
1 Sirdar 710.50 Three years --- --- Passed 10th class
(Colliery) examination under
10+2 system of
education with Science
(Physics and
Chemistry) as subject
or its equivalent
2 Shotfirer/Blaste 714.10 Two years --- --- Passed 10th class
r (Mines) examination under
10+2 system of
education or its
equivalent.
3 Mate (Mines) 710.40, 715.90 Three years --- --- Passed 10th class under
10+2 system of
education with Science
(Physics and
Chemistry) as one of
the subjects or its
equivalent.
Group No.18 – Chemical Trades Group:
1 Attendant 7414.40,7422.65 Two years 1. Attendant Operator One year Passed 10th class
Operator 8142.10,8142.15 (Chemical Plant) examination with
(Chemical 8142.40,8142.50 Science and
Mathematics under
Plant) 8142.90,8143.15
10+2 system of
8151.15,8151.308 education or its
151.60,8152.1081 equivalent.
52.30,8152.60815
3.10,8153.408154 One year --- --- Passed B.Sc. with
.20,8154.408155. Physics, Chemistry and
10,8159.348276.8 Mathematic or Biology.
1,8159.648159.72
,8159.768159.82,
8159.868276.10,8
276.208276.81,82
76.508276.70,827
5.508275.40,8131
.608231.10,8231.
678231.20,8122.1
08142.20,8142.45
8143.10,8143.258
151.30,8151.1081
51.60,8152.15815
2.25,8152.908153
.30,8154.108154.
30,8159.888159.3
0,8159.428159.62
,8159.688159.74,
8159.808159.84,8
159.888276.23,82
76.208276.40,827
6.607414.40,8275
.658272.10,8231.
658231.15,8231.3
0
2. Instrument 7311.30, 7311.65 Two years 1. Instrument Mechanic One year Passed 10th class
Mechanic 7241.10 (Chemical Plant) examination with
(Chemical Science and
Mathematics under
Plant)
10+2 system of
education or its
equivalent.
One year --- --- Passed B.Sc. with
Physics and Chemistry.
3. Laboratory 3111.30,3116.10 Two years 1. Laboratory Assistant One year Passed 10th class
Assistant 3116.30,3116.50 (Chemical Plant) examination with
(Chemical 3117.30 Science and
Mathematics under
Plant)
10+2 system of
education or its
equivalent.
One year -- -- Passed B.Sc. with
Physics, Chemistry and
Mathematic or Biology.
4. Fiber 8232.15 One year and 1. Broad Based Basic Three months Passed 10th class
Reinforced 8232.25 three months Training in Plastic examination under
Plastic 8232.30 Processing Sector under 10+2 system of
Processor 8232.70 Centre of Excellence education or its
Scheme equivalent.
2. Plastic Processing Three months
Operator
5. Plastic 8232.15,8232.18 Two years 1. Plastic Processing One year Passed 10th class
Processing 8232.20,8232.65 Operator examination with
Operator 8232.25,8232.30 Science and
Mathematics under
8232.35,8232.40
10+2 system of
8232.70,8232.45 education or its
8232.50,7222.50 equivalent.
Group No.19 – Cutting and Tailoring Trades Group:
1. Designer and 794.40, 794.60 One year and 1. Sewing Technology Three months Passed 10th class
Master Cutter three months examination under
2. Dress Making Three months 10+2 system of
education or its
equivalent.
2. Tailor (Men) 791.30 791.40 One year and 1. Sewing Technology Three months Passed 8th class
791.50 three months examination from a
2. Dress Making Three months recognised school.
3. Tailor (Women) 791.20 One year and 1. Sewing Technology Three months Passed 8th class
three months examination from a
2. Dress Making Three months recognised school.
4. Tailor (General) 791.10 791.90 One year and 1. Sewing Technology Three months Passed 8th class
three months examination from a
2. Dress Making Three months recognised school.
5. Dress Maker 781.20 One year and 1. Dress Making Three months Passed 8th class
three months examination from a
recognised school.”;
6. Embroiderer 795.40 One year and 1. Surface Ornamentation Three months Passed 8th class
(Surface three months Techniques (Embroidery) examination from a
Ornamentation recognised school.
Techniques) 2. Embroidery and Needle Three months
Work
7. Cutting and 7433.10 One year and 3. Sewing Technology Three months Passed 8th class
Sewing 7435.30 three months examination from a
Machine 7435.40 4. Dress Making Three months recognised school.
Operator
8. Assistant 7435.10 One year and 1. Fashion Design and Three months Passed 12th class
Fashion three months Technology examination under
Designer 10+2 system of
education or its
equivalent.
9. Computerized 8263.45 One year and 1. Computer Aided Three months Passed 10th class
Embroidery three months Embroidery and examination under
10+2 system of
Machine Designing education or its
Operator and equivalent.
Digitizer
Group No.20 – Agriculture Trades Group:
1. Mechanic 7231.10 Two years 1. Mechanic (Agriculture One year Passed 10th class
(Agriculture Machinery) examination under
Machinery) 10+2 system of
education or its
equivalent.
2. Horticulture 7231.10 Two years 1. Horticulture Assistant One year Passed 10th class
Assistant examination under
10+2 system or its
equivalent.
3. Stockman 082.10, 082.20 Two years --- --- Passed 10th class
(Dairy) examination under
10+2 system of
education with Science
or its equivalent.
4. Attendant 776.10, 776.20 Three years --- --- Passed 10th class
Operator 776.30, 776.40 Examination under
(Dairy) 776.50, 776.60 10+2 system of
776.70, 776.90 education with Science
and Mathematics or
its equivalent.
5. Pump Operator 845.57 Two years 1. Pump Mechanic One year Passed 10th class under
Cum Mechanic 10+2 system of
2. Pump Operator Cum One year education with Science
Mechanic or its equivalent.
6. Florist and 2213.20 One year Florist and Landscaping Six months Passed 10th class
Landscaper examination under
10+2 system of or its
equivalent
Group No. 21 – Leather Crafts Trades Group
1. Sports Goods 809.90 Two years Sports Goods Maker One year Passed 10th class
Maker (Leather) examination under
(Leather) 10+2 system of
education or its
equivalent.
2. Leather Goods 809.10, 809.20 Two years Manufacturer of suitcase and One year Passed 8th class
Maker 809.30, 809.40 other leather Goods examination under
10+2 system or 2 class
below Matriculation
examination or its
equivalent.
3. Footwear 801.10 Two years Manufacture of Footwear One year Passed in 8th
Maker examination under
10+2+3 or 2 class
below Matriculation
examination or its
equivalent.
4. Finished 761.00 Two years --- --- Passed in 8th
Leather Maker examination under
10+2+3 or 2 class
below Matriculation
examination or its
equivalent.
5. Maintenance 845.50 Three years Fitter One year Passed 10th under
Mechanic for 10+2 system (Physics
Leather and Chemistry) and
Machinery Math as subjects or its
equivalent.
6. Upholsterer 796.10 Two years 1. Upholsterer One year Pass in 8th class
examination under
2. Leather Goods Maker One year 10+2 system of
education or 2 class
below Matriculation
examination or its
equivalent.
Group No. 22- Ship Building Trades Group
1. Shipwright 816.20 Three years Fitter One year Passed 10th class under
(Steel) 10+2 system of
education or
equivalent.
Desirable – Passed
SSLC with Science
(Physics and
Chemistry) and Math
or its equivalent or
passed 10th class
examination under
10+2 system with
Science & Mathematics
as subjects.
2. Pipe Fitter 7136.10 Two years 1. Plumber One year Passed 10th class under
7136.30 10+2 system of
education or its
equivalent.
3. Rigger 7215.10 Two years --- --- Passed 8th class
examination from a
recognised school.
4. Gas Cutter 872.40 Two years Welder (Gas and Electric) One year Pass the 8th
examination under
10+2 system of
education or its
equivalent.
Desirable – Passed 8th
class examination with
Science and Math as
subject under 10+2+3
system of education or
two standard below
matriculation.
5. Shipwright 7124.45 Two years 1. Carpenter One year Passed 10th under
(Wood) 7124.70 examination under
10+2 system of
education or its
equivalent.
Group No. 23 – Electronics Trades Group
1. Mechanic Radio 7242.10,7243.20 Two years 1. Electronics Mechanic One year Passed 10th class
and Radar 7243.10,7243.75 examination under
Aircraft 7243.80 2. Mechanic Consumer One year 10+2 system of
Electronic Appliances education or its
equivalent.
3. Technician Power One year
Electronics System
4. Mechanic Industrial One year
Electronics
2. Electronics 7242.10,7242.90 Two years 1. Electronics Mechanic One year Passed 10th class under
Mechanic 7243.10,7243.40 10+2 system of
8283.90 education or its
equivalent.
3. Mechanic 854.20 Three years 1. Electronics Mechanic Two years Passed Matriculation
Television under 10+2 system
(Video) 2. Mechanic (Radio and Two years with Mathematics and
T.V.) Science or its
equivalent.
4. Mechanic – 7243.10 Two years 1. Electronics Mechanic One year Passed 10th class
cum-Operator 7243.20 examination under
Electronics 7243.75 2. Mechanic Consumer One year 10+2 system of
education or its
Communication 7243.80 Electronic Appliances
equivalent.
System 7244.10
7244.20 3. Technician Power One year
Electronics System
4. Broad Based Basic One year
Training in Electronics
Sector under Centre of
Excellence Scheme and
Advanced module of
Centre of Excellence in
Communication System
5. Mechanic 7244.20 Two years 1. Electronics Mechanic One year Passed 10th class
Communication examination under
Equipment 2. Mechanic Consumer One year 10+2 system of
Maintenance Electronic Appliances education or its
3. Technician Power One year equivalent.
Electronics System
4. Mechanic Industrial One year
Electronics
5. Broad Based Basic One year
Training in Electronics
Sector under Centre of
Excellence Scheme and
Advanced module of
Centre of Excellence in
Communication System
6. Mechanic Radio 7243.70 Three years Mechanic Radio and T.V. Two year Passed 10th class
and T.V. examination under
10+2 system of
education with Science
as one of the subject or
its equivalent.
Group No. 24 – Photography Trade Group
1. Photographer 173.10 Two years Photographer One year Passed 10th class under
10+2 system with
Science( Physics and
Chemistry) as one of
the subjects or its
equivalent.
2. Digital 3131.25 One year and Digital Photographer One year Passed 10th class
Photographer six months examination under
10+2 system of
education or its
equivalent.
Group No. 25 – Iron and Steel Trades Group
1. Brick Layer 7122.30 Two years 1. Mason (Building One year Passed 8th class
(Refractory) Constructor) examination under
10+2 system of
education or its
equivalent.
2. Furnace 3135.1100 One year and --- --- Passed 10th class
Operator (Steel three months examination under
Industry) 10+2 system of
education or its
equivalent.
3. Steel Melting 723.15, 723.20, Two years --- --- Passed 10th under
Hand 723.30 10+2 system with
Science( Physics and
Chemistry) &
Mathematics or its
equivalent.
4. Crane Operator 8343.0700 One year and --- --- Passed 10th class
Overhead (Steel three months examination under
Industry) 10+2 system of
education or its
equivalent.
5. Operator (Steel 8121.15,8121.55 Two years --- --- Passed 10th class
Plant) 8121.60,8122.50 examination under
8122.52,8159.10 10+2 system of
8159.12,8161.45 education with Science
and Mathematics or its
equivalent.
6. Electrician 7411.0100 Two years Electrician One year Passed 10th class
(Steel Plant) 7412.0801 examination under
10+2 system of
education or its
equivalent.
7. Electronics 7421.0100 Two years Electronics Mechanic One year Passed 10th class
Mechanic (Steel 7421.0300 examination under
Plant) 7421.9900 10+2 system of
education or its
equivalent.
8. Fitter (Steel 7126.0301 Two years Fitter One year Passed 10th class
Plant) 7126.9900 examination under
7224.0102 10+2 system of
education or its
equivalent.
9. Instrument 7311.0101 Two years Instrument Mechanic One year Passed 10th class
Mechanic (Steel 7311.1000 examination under
Plant) 10+2 system of
education or its
equivalent.
10 Operator Coal 8112.0600 One year and --- --- Passed 10th class
Handling three months examination under
Equipment 10+2 system of
education or its
equivalent.
11 Operator 8162.50, 8333.30 One year and --- --- Passed 10th class
Locomotive and three months examination under
Rail Cranes in 10+2 system of
Steel Plant education or its
equivalent.
12 Operator 8121.90 One year and --- --- Passed 8th class
Material three months examination from a
Handling at recognized school or its
Raw Material equivalent.
Handling Plant
13 Operator Coke 8159.16 One year and --- --- Passed 10th class
Ovens Battery three months examination under
Equipments 10+2 system of
education or its
equivalent.
14 Operator Blast 8121.15 One year and --- --- Passed 10th class
Furnace Iron 8223.60 three months examination under
Making 10+2 system of
Equipments education or its
equivalent.
15 Operator Steel 8121.35 One year and --- --- Passed 10th class
Melting three months examination under
Equipments 10+2 system of
education or its
equivalent.
16 Operator Sinter 8121.90 One year and --- --- Passed 10th class
Plant three months examination under
Equipments 10+2 system of
education or its
equivalent.
17 Operator 8122.20 One year and --- --- Passed 10th class
Rolling Mills three months examination under
Equipment 10+2 system of
(Long Products) education or its
equivalent.
Group No. 26 – Beautician Trades Group
1. Beautician 560.30 One year and --- --- Passed 10th class
three months examination under
10+2 system of
education or its
equivalent.
2. Hair Cutter/ 560.20 One year and --- --- Passed 8th class
Dresser three months examination from a
recognised school or
its equivalent.
3. Health and 089.50 One year and --- --- Passed 10th class
Slimming three months examination under
Assistant 10+2 system of
education or its
equivalent.
4. Hair and Skin 560.30 One year and 1. Basic Cosmetology Three months Passed 10th class
Carer three months examination under
10+2 system of
education or its
equivalent.
Group No. 27 – Glass and Ceramic Trades Group
1. Ceramic 7321.25 One year and --- --- Passed 8th class
Moulder three months examination from a
recognised school.
2. Ceramic Caster 7321.15 One year and --- --- Passed 8th class
three months examination from a
recognised school.”;
3. Ceramic Kiln 893.30 Two years --- --- Passed 8th class of 10+2
Operator system of education or
2 standard below or its
equivalent.
4. Ceramic Press 892.60 Two years --- --- Passed 8th class of 10+2
Operator system of education or
2 standard below or its
equivalent.
5 Ceramic 895.30 Two years --- --- Passed 8th class of 10+2
Decorator system of education or
2 standard below or its
equivalent.
6. Moulder 7321.40 One year and --- --- Passed 8th class
(Refractory) three months examination from a
recognised school.
7. Enamel Glazer 895.50 Two years --- --- Passed 10th class
examination under
10+2 system with
Science as subject or its
equivalent.
8. Insulator 8139.60 Two years 1. Refractory Technician One year Passed 10th class
Maker/Machine 8139.30 examination under
Operator 10+2 system of
education with science
(Ceramic)
or its equivalent.
9. Optical Worker 891.48 Three years 1. Machinist One year Passed 10th class
examination under
2. Millwright Maintenance One year 10+2 system of
Mechanic education or its
equivalent.
3. Turner One year
4. Fitter One year
5. Machinist(Grinder) One year
Group No. 28 – Painting Trades Group
1. Painter 7142.10 Two years 1. Painter (General) One year Passed 8th class
(General) examination from a
recognised school.
2. Painter 931.20 Two years Painter (General) One year Passed 8th class
(Marine) examination under
10+2 system preferably
with Math and Science
or two standard below.
Group No. 29 – Computer Trades Group
1. Desk Top 3512.0200 One year and 1. Desk Top Publishing Three months Passed 10th class
Publishing three months Operator examination under
Operator 10+2 system of
education or its
equivalent.
2. Programming 103.70 103.80 One year --- --- National Trade
and Systems Certificate issued by
Administration National Council for
Assistant Vocational Training in
“Computer Operator
and Programming
Assistant”
3. Information and 3114.9900 Two years 1. Information and One year Passed 10th class
Communication Communication examination under
Technology Technology System 10+2 system of
System Maintenance education
Maintenance
2. Information Technology One year
and Electronic System
Maintenance
3. Broad Based Basic One year
Training in Information
Technology Sector under
Centre of Excellence
Scheme and Advanced
module of Centre of
Excellence Scheme in
Repair and Maintenance
of Hardware of Computer
and Peripherals.
4. Computer 4131.0600 One year and 1. Computer Operator and Three months Passed 10th class
Operator and 3514.0300 three months Programming Assistant examination under
Programming 10+2 system of
Assistant education or its
equivalent.
Group No. 30 – Hi-Tech Trades Group
1. Advanced 730.20, 740.10, One year & six --- --- Passed B.Sc. with
Attendant 740.90, 900.10, months Physics and Chemistry
Operator 740.20, 890.20, as compulsory and
(Process) 770.90, 730.90, Mathematics as
770.40 desirable subject.
2. Operator Cum 039.10, Two years --- --- Passed Higher
Mechanic 039.90 Secondary Examination
Pollution with Physics,
Control Chemistry and Biology
Equipment. under 10+2 system of
Education or its
equivalent.
3. Mechanic 086.10, 088.10, Two years --- --- Passed Higher
Medical 089.90, 090.90 Secondary examination
Equipment for under 10+2 system of
Hospitals and education with Physics,
Occupational Chemistry and Biology.
Health Centre.
Group No. 31 – Multi Skill Trades Group
1 Mechanic 7243.10 Two years 1. Electronics Mechanic One year Passed 10th class
Industrial examination under
Electronics 2. Mechanic Consumer One year 10+2 system of
Electronic Appliances education or its
equivalent.
3. Technician Power One year
Electronics System
4. Mechanic Industrial One year
Electronics
2 Mechanic 845.10, 845.13 Three years - - Passed 10+2 with
Advanced 845.16, 845.20 Physics, Chemistry and
Machine Tool 845.23, 845.26 Mathematics
Maintenance. 845.30, 845.35
845.37, 845.40
845.43, 845.47
845.50, 845.53
845.55, 845.57
845.60, 845.63
845.65, 845.70
3. Operator 8211.108211.15 Two years 1. Operator Advanced One year Passed 10th class
Advanced 8211.22 Machine Tool examination with
Machine Tool 8211.28 Science and
8211.30 2. Machinist One year Mathematics under
8211.32 10+2 system of
8211.36 3. Turner One year education or its
8211.38 equivalent.
4. Power 7137.10 Two years 1. Electrician One year Passed 10th class
Electrician 7241.107241.208 examination with
161.45 Science under 10+2
system of education or
8161.50
its equivalent.
5. Operator-cum- 8161.45 Two years --- --- Passed 10th class
Mechanic examination with
Power Plant Science and
Mathematics under
10+2 system of
education or its
equivalent.
6. Mechanic 7243.30 Two years 1. Electronics Mechanic One year Passed 10th class
Medical 3133.20 examination under
Electronics 3133.90 2. Mechanic Consumer One year 10+2 system of
Electronic Appliances education or its
equivalent.
3. Technician Power One year
Electronics System
4. Mechanic Medical One year
Electronics
7. Mechanic 7242.10 Two years 1. Electronics Mechanic One year Passed 10th class
Consumer 7242.90 examination under
Electronics 7243.10 2. Mechanic Consumer 10+2 system of
Appliances 7243.40 Electronic Appliances One year education or its
7243.45 equivalent.
7243.50 3. Technician Power One year
7233.58 Electronics Systems
8. Mechanic 7233.38 Two years 1. Mechanic Mechatronics One year Passed 10th class
Mechatronics 7233.46 examination with
2. Mechanic Machine Tool One year Science and
Maintenance Mathematics under
10+2 system of
education or its
equivalent.
Group No. 32 – Information Sector Trades Group
1. Jewel Smith 7318.30 One year and ---- ---- Passed 8th class
7313.90 three months examination from a
recognised school.
2. Gardener (Mali) 652.10 One year ---- ---- Passed 8th class
examination from
recognized school or
its equivalent.
3. Customer Care 4221.90 One year and --- --- Passed 10th class
Associate 4221.30 three months examination under
10+2 system of
education or its
equivalent.
4. Assistant 560.30 One year and --- --- Passed 8th class
Beautician three months examination from a
recognised school.
5. Battery 859.65 One year and ---- ---- Passed 10th class
Repairer three months examination under
10+2 system of
education or its
equivalent.
6. Tyre Repairer 903.60 Six months ---- ---- Passed 8th class
examination
7. Screen Printing 929.50 Six months ---- ---- Passed 10th class
examination under
10+2 system of
education or its
equivalent.
8. Beautician 560.30 Six months ---- ---- Passed 10th class
Assistant examination under
10+2 system of
education or its
equivalent.
9. Medical 3221.10 One year and ---- ---- Passed 12th class
Laboratory three months examination under
Technician 10+2 system of
(Pathology) education with physics,
chemistry and biology
10. Medical 3133.10 One year and ---- ---- Passed 12th class
Laboratory three months examination under
Technician 10+2 system of
(Radiology) education with physics,
chemistry and biology.
11. Medical 3212.0701 One year and ---- ---- Passed 12th class
Laboratory three months examination under
Technician 10+2 system of
(Cardiology) education with physics,
chemistry and biology.
12. Pruner Tea 640.10 Six months ---- ---- Passed 8th class
Gardens
13. Cable 861.10 Six months ---- ---- Passed 10th class
Television examination under
Operator 10+2 system of
education or its
equivalent.
14. Medical 3212.0701 One year and 1. Physiotherapy Technician Three months Passed 12th class
Laboratory 3255.0101 three months examination under
Technician 10+2 system of
(Physiotherapy) education with physics,
chemistry and biology.
Group No. 33 – Retail Sector Trades Group
1. Sales Person 5220.35 One year and --- --- Passed 10th class
(Retail) 5220.60 three months examination under
10+2 system of
education or its
equivalent..
2. Senior Sales 5220.15, 5220.35 One year Sales Person (Retail) Six months Passed 10th class
Person (Retail) examination under
10+2 system of
education or its
equivalent.
Group No. 34 – Glassware / Metal ware Trades Group
1. Lacquering and 7422.60 One year --- --- Passed 10th class
Powder Coating 7422.62 examination under
Operator 10+2 system of
education or its
equivalent.
2. Wood 7422.42 One year --- --- Passed 10th class
Handicrafts 7422.48 examination under
Worker 7423.20 10+2 system of
education or its
equivalent.
3. Glass Former 7142.60 One year --- --- Passed 8th class
and Processor 7322.38 examination from
7322.40 recognized school or its
7322.45 equivalent.
7323.10
Group No. 35 – Centre of Excellence Trades Group
1. Mechanic 7233.22 Two years 1. Broad Based Basic One year Passed 10th class
Automobile Training in Automobile examination under
(Advanced Sector under Centre of 10+2 system of
Petrol Engine) Excellence Scheme and education or its
Advanced module of equivalent.
Centre of Excellence
Scheme in Servicing and
Overhauling of
Automobiles (Petrol).
2. Mechanic 7233.24 Two years 1. Broad Based Basic One year Passed 10th class
Automobile Training in Automobile examination under
(Advanced Sector under Centre of 10+2 system of
Diesel Engine) Excellence Scheme and education or its
Advanced module of equivalent.
Centre of Excellence
Scheme in Servicing and
Overhauling of
Automobiles (Diesel).
3. Mechanic Auto 7242.10 Two years Broad Based Basic Training One year and Passed 10th class
Electronics in Automobile Sector under six months examination under
Centre of Excellence Scheme 10+2 system of
and Advanced module of education or its
Centre of Excellence Scheme equivalent.
in Auto Electrical, Auto
Electronics and Air-
conditioning in Automobiles.
4. Mechanic 7142.20 Two Years Broad Based Basic Training One year and Passed 10th class
(Denting, 7213.30 in Automobile Sector under six months examination under
Painting and Centre of Excellence Scheme 10+2 system of
Welding) and Advanced module of education or its
Centre of Excellence Scheme equivalent.
in Denting(Painting and
Welding).
5. TIG/MIG 7212.10 One year and 1. Broad Based Basic Three months Passed 10th class
Welder 7212.20 three months Training in Fabrication examination under
(Fitting & Welding) 10+2 system of
Sector under Centre of education or its
Excellence Scheme and equivalent.
Advanced module of
Centre of Excellence
Scheme in TIG/MIG
Welding.
2. Welder Three months
6. Structural 7212.10 One year and 1. Broad Based Basic Three months Passed 10th class
Welder 7212.20 three months Training in Fabrication examination under
7212.30 (Fitting & Welding) 10+2 system of
Sector under Centre of education or its
Excellence Scheme and equivalent.
Advanced module of
Centre of Excellence
Scheme in Structural
Welding.
2. Welder Three months
7. Welder (Pipe 7212.10 One year and 1. Broad Based Basic Three months Passed 10th class
and Pressure 7212.20 three months Training in Fabrication examination under
Vessels) 7212.30 (Fitting and Welding) 10+2 system of
Sector under Centre of education or its
Excellence Scheme and equivalent.
Advanced module of
Centre of Excellence
Scheme in Pressure
Vessels and Pipe Welding.
2. Welder Three months
8. Chemical 3111.30 Two years 1. Broad Based Basic One year Passed 10th class
Laboratory Training in Chemical examination under
Assistant Sector under Centre of 10+2 system of
Excellence Scheme and education or its
Advanced module of equivalent.
Centre of Excellence
Scheme in Laboratory
Assistant
2. Laboratory Assistant One year
(Chemical Plant)
9. Advance 7311.10 Two years Broad Based Basic Training One year and Passed 10th class
Mechanic 7311.30 in Chemical Sector under six months examination under
(Instruments) 7241.10 Centre of Excellence Scheme 10+2 system of
and Advanced module of education or its
Centre of Excellence Scheme equivalent.
in Instruments Mechanic.
10. CAD-CAM 3121.20 One year and 1. Broad Based Basic Three months Passed 10th class
Operator cum three months Training in Production examination under
Programmer and Manufacturing Sector 10+2 system of
under Centre of education or its
Excellence Scheme and equivalent.
Advanced module of
Centre of Excellence
Scheme in CAD/ CAM.
2. Draughtsman Three months
(Mechanical)
11. Advance 7212.10 One year and 1. Broad Based Basic Three months Passed 10th class
Welder 7212.20 three months Training in Production examination under
7212.30 and Manufacturing 10+2 system of
7212.65 Sector under Centre of education or its
Excellence Scheme and equivalent.
Advanced module of
Centre of Excellence
Scheme in Advance
Welding.
2. Welder Three months
12. Jigs and 7222.30 Two years Broad Based Basic Training One year and Passed 10th class
Fixtures Maker in Production and six months examination under
Manufacturing Sector under 10+2 system of
Centre of Excellence Scheme education or its
and Advanced module of equivalent.
Centre of Excellence Scheme
in Manufacturing of Jigs and
Fixtures.
13. Quality 3152.90 Two years Broad Based Basic Training One year and Passed 10th class
Assurance in Production and six months examination under
Assistant Manufacturing Sector under 10+2 system of
Centre of Excellence Scheme education or its
and Advanced module of equivalent.
Centre of Excellence Scheme
in Quality Engineering.
14. CNC 3121.20 One year and 1. Broad Based Basic Three months Passed 10th class
Programmer three months Training in Production examination under
cum Operator and Manufacturing Sector 10+2 system of
under Centre of education or its
Excellence Scheme and equivalent.
Advanced module of
Centre of Excellence
Scheme in CNC
Machining.
2. Machinist Three months
3. Turner Three months
15. Operator PLC 8211.90 Two years Broad Based Basic Training One year and Passed 10th class
System in Production and six months examination under
Manufacturing Sector under 10+2 system of
Centre of Excellence Scheme education or its
and Advanced module of equivalent.
Centre of Excellence Scheme
in PLC and Automation.
16. Mechanic 7233.58 Two years 1. Broad Based Basic One year Passed 10th class
(Electrical Training in Electrical examination under
Domestic Sector under Centre of 10+2 system of
Appliances) Excellence Scheme and education or its
Advanced module of equivalent.
Centre of Excellence
Scheme in Repair and
Maintenance of Domestic
Appliances.
2. Electrician One year
17. Mechanic (HT, 7241.90 Two years 1. Broad Based Basic One year Passed 10th class
LT Equipments 7245.90 Training in Electrical examination under
and Cable Sector under Centre of 10+2 system of
Jointing) Excellence Scheme and education or its
Advanced module of equivalent.
Centre of Excellence
Scheme in Operation and
Maintenance of
equipments used in HT,
LT Substation and Cable
Jointing.
2. Electrician One year
18. Mechanic 7241.20 Two years 1. Broad Based Basic One year Passed 10th class
(Electrical 7242.20 Training in Electrical examination under
Power Drives) Sector under Centre of 10+2 system of
Excellence Scheme and education or its
Advanced module of equivalent.
Centre of Excellence
Scheme in Repair and
Maintenance of Electrical
machines and Power
Supply.
2. Electrician One year
19. Mechanic 8211.90 Two years 1. Broad Based Basic One year Passed 10th class
(Embedded Training in Electronics examination under
Systems and Sector under Centre of 10+2 system of
PLC) Excellence Scheme and education or its
Advanced module of equivalent.
Centre of Excellence
Scheme in Embedded
Systems and PLC.
20. Mechanic 7241.10 Two years 1. Broad Based Basic One year Passed 10th class
Power 7242.10 Training in Electronics examination under
Electronics Sector under Centre of 10+2 system of
(Inverters, UPS Excellence Scheme and education or its
and Advanced module of equivalent.
Maintenance of Centre of Excellence
Drives) Scheme in Inverters,
UPS, Voltage Stabilizer
and Industrial Drives.
2. Electronics Mechanic One year
3. Mechanic Consumer
Electronic Appliances One year
4. Technician Power One year
Electronics Systems
5. Mechanic Industrial One year
Electronics
21. Mechanic (DTH 7243.10 Two years Broad Based Basic Training One year and Passed 10th class
and other 7244.20 in Electronics Sector under six months examination under
Communication Centre of Excellence Scheme 10+2 system of
System) and Advanced module of education or its
Centre of Excellence Scheme equivalent.
in Communication System.
22. Mechanic 7233.50 Two years 1. Broad Based Basic One year Passed 10th class
(Domestic, Training in Refrigeration examination under
Commercial and Air-conditioning 10+2 system of
Refrigeration Sector under Centre of education or its
and Air Excellence Scheme and equivalent.
Conditioning Advanced module of
Machines) Centre of Excellence
Scheme in Domestic,
Commercial Refrigeration
and Air Conditioning.
2. Mechanic (Refrigeration One year
and Air Conditioning)
23. Mechanic 8169.30 Two years 1. Broad Based Basic One year Passed 10th class
(Central Air Training in Refrigeration examination under
conditioning and Air-conditioning 10+2 system of
Plant, Industrial Sector under Centre of education or its
cooling and Excellence Scheme and equivalent.
Package Air Advanced module of
conditioning) Centre of Excellence
Scheme in Central Air
conditioning Plant,
Industrial cooling and
Package Air-conditioning.
24. Mechanic (Cold 7413.50 Two years Broad Based Basic Training One year and Passed 10th class
storage, Ice 8169.30 in Refrigeration and Air- six months examination under
plant and Ice conditioning Sector under 10+2 system of
candy plant) Centre of Excellence Scheme education or its
and Advanced module of equivalent.
Centre of Excellence Scheme
in Cold storage, Ice plant and
Ice candy plant.
25. Computer 7222.80 Two years Broad Based Basic Training One year and Passed 10th class
Aided Pattern 7422.38 in Apparel Sector under six months examination under
Maker 7434.20 Centre of Excellence Scheme 10+2 system of
7435.10 and Advanced module of education or its
7442.16 Centre of Excellence Scheme equivalent.
in Computer Aided and
Pattern Making.
26. Fashion 3471.40 Two years Broad Based Basic Training One year and Passed 10th class
Designing in Apparel Sector under six months examination under
Centre of Excellence Scheme 10+2 system of
Assistant and Advanced module of education or its
Centre of Excellence Scheme equivalent.
in Fashion Designing.
27. Shirts and 7433.25 One year and 1. Broad Based Basic Three months Passed 10th class
Trousers Maker 7433.30 three months Training in Apparel Sector examination under
under Centre of 10+2 system of
Excellence Scheme and education or its
Advanced module of equivalent.
Centre of Excellence
Scheme in Shirts and
Trousers.
2. Sewing Technology Three months
3. Dress Making Three months
“28. Mechanic (Non- 8282.10 Two years 1. Broad Based Basic One year Passed 10th class
conventional Training in Electrical examination under
Power Sector under Centre of 10+2 system of
Generation, Excellence Scheme and education or its
Battery and Advanced module of equivalent.
Inverter) Centre of Excellence
Scheme in Non-
conventional Power
Generation, Battery and
Inverter.
2. Electrician One year
29. Mechanic 7241.10 Two years 1. Broad Based Basic One year Passed 10th class
Electrical Training in Electrical examination under
Instruments Sector under Centre of 10+2 system of
Excellence Scheme and education or its
Advanced module of equivalent.
Centre of Excellence
Scheme in Repair and
Maintenance of
instruments used in
Electrical Engineering.
2. Electrician One year
30. Extrusion 8232.20 Two years 1. Broad Based Basic One year Passed 10th class
Machine Training in Plastic examination under
Operator Processing Sector under 10+2 system of
(Plastic) Centre of Excellence education or its
Scheme and Advanced equivalent.
module of Centre of
Excellence Scheme in
Extrusion Process.
2. Plastic Processing One year
Operator
31. Injection 8232.25 Two years 1. Broad Based Basic One year Passed 10th class
Moulding Training in Plastic examination under
Machine Processing Sector under 10+2 system of
Operator Centre of Excellence education or its
Scheme and Advanced equivalent.
module of Centre of
Excellence Scheme in
Injection Moulding
Process.
2. Plastic Processing One year
Operator
32. Blow Moulding 8232.35 Two years 1. Broad Based Basic One year Passed 10th class
Machine Training in Plastic examination under
Operator Processing Sector under 10+2 system of
Centre of Excellence education or its
Scheme and Advanced equivalent.
module of Centre of
Excellence Scheme in
Blow Moulding Process.
2. Plastic Processing One year
Operator
33. House Keeper 5121.10 Two years Broad Based Basic Training One year and Passed 10th class
(Hotel) in Hospitality Sector under six months examination under
Centre of Excellence Scheme 10+2 system of
and Advanced module of education or its
Centre of Excellence Scheme equivalent.
in Accommodation
Operation/ House Keeping.
34. Assistant Front 5121.25 Two years Broad Based Basic Training One year and Passed 10th class
Office Manager in Hospitality Sector under six months examination under
Centre of Excellence Scheme 10+2 system of
and Advanced module of education or its
Centre of Excellence Scheme equivalent.
in Front Office Management.
35. Apprentice 5122.20 Two years Broad Based Basic Training One year and Passed 10th class
Food in Hospitality Sector under six months examination under
Production Centre of Excellence Scheme 10+2 system of
(Cookery) and Advanced module of education or its
Centre of Excellence Scheme equivalent.
in Food Production
(Cookery).
36. Apprentice 5123.20 Two years Broad Based Basic Training One year and Passed 10th class
Food and in Hospitality Sector under six months examination under
Beverage Centre of Excellence Scheme 10+2 system of
Service and Advanced module of education or its
(Stewardship) Centre of Excellence Scheme equivalent.
in Food and Beverage
Service (Stewardship).
37. Computer and 2523.0200 One year and 1. Broad Based Basic Three Passed 10th class
Peripherals 7422.2001 three months Training in Information months examination under
Hardware Technology Sector under 10+2 system of
Repair and Centre of Excellence education or its
Maintenance Scheme and Advanced equivalent.
Mechanic module of Centre of
Excellence Scheme in
Repair and Maintenance
of Hardware of
Computer and
Peripherals.
38. Computer 2523.9900 One year and 1. Broad Based Basic Three months Passed 10th class
Networking 3513.9900 three months Training in Information examination under
Technician Technology Sector under 10+2 system of
Centre of Excellence education or its
Scheme and Advanced equivalent.
module of Centre of
Excellence Scheme in
Computer Networking.
39. Multimedia and 2166.0201 One year and 1. Broad Based Basic Three months Passed 10th class
Web Page 2513.0101 three months Training in Information examination under
Designer 2166.0300 Technology Sector under 10+2 system of
Centre of Excellence education or its
Scheme and Advanced equivalent.
module of Centre of
Excellence Scheme in
Multimedia and Web
Page Designing.
40. Process Plant 8152.10 Two years Broad Based Basic Training One year and Passed 10th class
Operator in Process Plant Maintenance six months examination under
Sector under Centre of 10+2 system of
Excellence Scheme and education or its
Advanced module of Centre equivalent.
of Excellence Scheme in
Operator Chemical Plant.
41. Utility Operator 3131.0300 One year and 1. Broad Based Basic Three months Passed 10th class
8182.0200 three months Training in Process Plant examination under
Maintenance Sector 10+2 system of
under Centre of education or its
Excellence Scheme and equivalent.
Advanced module of
Centre of Excellence
Scheme in Operation and
Maintenance of Boiler
and Steam Turbine.
42. Maintenance 8159.79 Two years Broad Based Basic Training One year and Passed 10th class
Mechanic in Process Plant Maintenance six months examination under
Sector under Centre of 10+2 system of
Excellence Scheme and education or its
Advanced module of Centre equivalent.
of Excellence Scheme in
Mechanical Maintenance of
Process Plant.
43. Mechanic 7241.20 Two years 1. Broad Based Basic One year Passed 10th class
(Electrical Training in Process Plant examination under
Maintenance of Maintenance Sector under 10+2 system of
Process Plant) Centre of Excellence education or its
Scheme and Advanced equivalent.
module of Centre of
Excellence Scheme in
Electrical Maintenance of
Process Plant.
2. Electrician One year
44. Instrument 7311.0101 Two years 1. Broad Based Basic One year Passed 10th class
Controller 7311.1001 Training in Process Plant examination under
Maintenance Sector 10+2 system of
under Centre of education or its
Excellence Scheme and equivalent.
Advanced module of
Centre of Excellence
Scheme in Electronic and
Instrument Maintenance
of Process Plant.
2. Instrument Mechanic One year
45. Technician 7212.30 Two years Broad Based Basic Training One year and Passed 10th class
Fabricator in Process Plant Maintenance six months examination under
Sector under Centre of 10+2 system of
Excellence Scheme and education or its
Advanced module of Centre equivalent.
of Excellence Scheme in
Fabrication and Designing of
Steel Structure.
46 Technician 7243.10 Two years 1. Broad Based Basic One year Passed 10th class
Television and 7243.40 Training in Electronics examination under
Audio System 7243.45 Sector under Centre of 10+2 system of
7243.50 Excellence Scheme and education or its
7243.70 anyone Advanced module equivalent.
in Centre of Excellence
Scheme of Electronic
Sector
2. Electronics Mechanic One year
3. Mechanic Consumer One year
Electronic Appliances
47. Mechanic 7243.10 Two years 1. Broad Based Basic One year Passed 10th class
Repair and Training in Electronics examination under
Maintenance of Sector under Centre of 10+2 system of
Electronics Test Excellence Scheme and education or its
Equipment Advanced module of equivalent.
Centre of Excellence
Scheme in Repair and
Maintenance of
Electronics Test
Equipment
2. Electronics Mechanic One year
3. Mechanic Consumer One year
Electronic Appliances
4. Technician Power One year
Electronics Systems
5. Mechanic Industrial One year
Electronics
48. Mechanic 7231.10 Two years Broad Based Basic Training One year and Passed 10th class
Automobile in Electronics Sector under six months examination under
Electronics Centre of Excellence Scheme 10+2 system of
and Advanced module of education or its
Centre of Excellence Scheme equivalent.
in Automobile Electronics
49. Mechanic 7233.38 Two years Broad Based Basic Training One year and Passed 10th class
Mechanical in Industrial Automation six months examination under
Maintenance Sector under Centre of 10+2 system of
(Industrial Excellence Scheme and education or its
Automation) Advanced module of Centre equivalent.
of Excellence Scheme in
Mechanical Maintenance for
Automation
50. Mechanic 7241.70 Two years Broad Based Basic Training One year and Passed 10th class
Electrical in Industrial Automation six months examination under
Maintenance Sector under Centre of 10+2 system of
(Industrial Excellence Scheme and education or its
Automation) Advanced module of Centre equivalent.
of Excellence Scheme in
Electrical Maintenance for
Automation
51. PLC Operator 7233.38 Two years 1. Broad Based Basic One year Passed 10th class
Training in Industrial examination under
Automation Sector under 10+2 system of
Centre of Excellence education or its
Scheme and Advanced equivalent.”;
module of Centre of
Excellence Scheme in
Automation and PLC.
2. Broad Based Basic One year
Training in Production
and Manufacturing Sector
under Centre of
Excellence Scheme and
Advanced module of
Centre of Excellence
Scheme in PLC
Automation.
Group No. 36 – Hospitality Trades Group
1. Tourist Guide 5113.20 One year Tourist Guide Six months Passed 10th class
examination under
10+2 system of or its
equivalent
2. Old Age Care 5131.20 One year Old Age Care Six months Pass 8th class
Taker examination from
recognized school or its
equivalent.
3. Creche 5121.40 One year Creche Management Six months Passed 10th class
Management examination under
Assistant 10+2 system of
education or its
equivalent.
4. Pre or 3222.10 One year Pre or Preparatory School Six months Passed 10th class
Preparatory Management (Assistant) examination under
School 10+2 system of
Management education or its
(Assistant) equivalent.
5. Insurance Agent 3412.10 One year Insurance Agent Six months Passed 10th class
examination under
10+2 system of or its
equivalent
Group No. 37 – Office Management Trades Group
1. Secretarial 4115.10 One year and 1. Stenography (English) Three months Passed 10th class
Assistant three months examination under
2. Secretarial Practice 10+2 system of or its
Three months equivalent
2. Stenographer 4111.10 One year and 1. Stenography (English) Three months Passed 10th class
(English) three months examination under
10+2 system of or its
equivalent
3. Stenographer 4111.10(H) One year and 2. Stenography (Hindi) Three months Passed 10th class
(Hindi) three months examination under
10+2 system of
education with Hindi as
compulsory subject or
its equivalent.
Group No. 38 – Health Allied Trades Group
1. Dental 7311.80 Three years Dental Laboratory Two years Passed 10th class
Laboratory Technician examination under
Technician 10+2 system of
education or its
equivalent.
2. Heath Sanitary 3257.0100 One year and 1. Heath Sanitary Inspector Three months Passed 10th class
Inspector three months examination under
10+2 system of
education or its
equivalent.
3. Hospital Waste 5151.9900 One year and 1. Hospital Waste Three months Passed 10th class
Management three months Management Assistant examination under
Assistant 10+2 system of
education or its
equivalent.
Group No. 39 – library and Information Science Trades Group
1. Library 4141.10 One year Library and Information Six months Passed 10th class
Assistant Science examination under
10+2 system of or its
equivalent
SCHEDULE-IA
(See rule 3(2)
Category of Apprentices Minimum Educational Qualification
(1) (2)
(a) A degree in engineering or technology granted by a
statutory University.
(b) A degree in engineering or technology granted by
an institution empowered to grant such degrees by
an Act of Parliament.
Graduate apprentices (c) Graduate examination of professional bodies
recognised by the Central Government as
equivalent to a degree.
(d) A sandwich course student who is undergoing
training in order that he may hold a degree in
engineering or technology as mentioned at (a) and
(b) above
(a) A diploma in engineering or Technology granted
by a State Council or Board of Technical
Educational established by a State Government.
(b) A diploma in engineering or technology granted by
a University.
Technician Apprentices (c) A diploma in engineering or technology granted by
an Institute recognised by the State Government or
Central Government as equivalent to (a) and (b)
above.
(d) A sandwich course student who is undergoing
training in order that he may hold a diploma
mentioned in (a), (b) & (c) above
(a) A certificate in vocational Course involving two
years of study after the completion of the secondary
stage of school education recognised by the All India
Technician (Vocational) Council for Technical education.
Apprentices
(b) A sandwich course student who is undergoing
training in order that he may hold a certificate
mentioned in (a) above
“Schedule I-B
[See rule 7(1A)]
Sl. Board/State Council Trade/Course/ Duration of Designated trade(s) in Period of Period of
No. for Technical Subject fields Trade/Course/ the category of trade Apprenticeship Apprenticeship
Education/ Other Subject field apprentices Training under Training after
Authority/ course the Apprentices rebate
approved under any Act,1961
scheme
1. 2. 3. 4. 5. 6. 7.
1. 1. Maharashtra State 1. Interior One year 1. Architectural Two years One year and
Board of Decorator Assistant six months
Vocational
Education 2. Interior Designer Two years One year and
Examination, and Decorator six months
Mumbai
2. Technique of One year 1. Architectural Two years One year and
Interior Assistant six months
Designing
2. Interior Designer Two years One year and
and Decorator six months
3. Architect Two years 1. Architectural Two years One year
Draughtsman Assistant
4. Architectural Two years 1. Architectural Two years One year
Graphics Assistant
Designer
5. Landscape Two years 1. Architectural Two years One year
Architecture Assistant
6. Exterior And Two years 1. Architectural Two years One year
Interior Assistant
Designer
2. Interior Designer Two years One year
and Decorator
7. Construction One year 1. Building One year and One year
Supervisor Maintenance three months
Technician
2. Mason (Building Two years One year and
Constructor) six months
8. Building Site One year 1. Building One year and One year
Supervisor Maintenance three months
Technician
2. Mason (Building Two years One year and
Constructor) six months
9. Civil One year 1. Building One year and One year
Supervisor Maintenance three months
Technician
2. Mason (Building Two years One year and
Constructor) six months
10. Construction One year 1. Building One year and One year
Technique Maintenance three months
Technician
Two years One year and
2. Mason (Building six months
Constructor)
11. Civil One year 1. Building One year and One year
Construction Maintenance three months
Technician
2. Mason (Building Two years One year and
Constructor) six months
12. Construction Two years 1. Building One year and One year
Surveying Maintenance three months
Technician
2. Mason (Building Two years One year
Constructor)
13. Building Two years 1. Building One year and One year
Construction Maintenance three months
Supervisor Technician
2. Mason (Building Two years One year
Constructor)
14. Building Two years 1. Building One year and One year
Maintenance Maintenance three months
Technician
2. Mason (Building Two years One year
Constructor)
15. Building Two years 1. Building One year and One year
Construction Maintenance three months
Technology Technician
2. Mason (Building Two years One year
Constructor)
16. Building Two years 1. Building One year and One year
Construction Maintenance three months
Management Technician
2. Mason (Building Two years One year
Constructor)
17. Building Two years 1. Building One year and One year
Construction Maintenance three months
And Technician
Plumbing
2. Mason (Building Two years One year
Constructor)
3. Plumber Two years One year
18. Building Two years 1. Building One year and One year
Service And Maintenance three months
Maintenance Technician
2. Mason (Building Two years One year
Constructor)
19. Carpentry One year 1. Carpenter Two years One year and
And six months
Furniture
Making
20. Furniture Two years 1. Carpenter Two years One year
Making And
Designing
21. Furniture Two years 1. Carpenter Two years One year
Making
22. Architect Two years 1. Draughtsman Two years One year
Draughtsman (Civil)
23. Draughtsman Two years 1. Draughtsman Two years One year
Civil (Civil)
24. Draughtsman Two years 1. Draughtsman Two years One year
Mechanical Mechanical
25. Repair And Two years 1. Electrician Two years One year
Rewinding of
Electrical 2. Wireman Two years One year
Domestic
Appliances
26. Repair And Two years 1. Electrician Two years One year
Rewinding
Of Electric 2. Wireman Two years One year
Motors
27. Electrical Two years 1. Electrician Two years One year
Engineering
2. Wireman Two years One year
28. High Voltage Two years 1. Electrician Two years One year
Engineering
2. Wireman Two years One year
29. Illumination Two years 1. Electrician Two years One year
Engineering
2. Wireman Two years One year
30. Electrical Two years 1. Electrician Two years One year
Instrumentati
on 2. Wireman Two years One year
31. Electrician Two years 1. Electrician Two years One year
2. Wireman Two years One year
32. Radio And Two years 1. Electronic Two years One year
Audio Mechanic
System
33. T.V. Video Two years 1. Electronic Two years One year
System Mechanic
34. Consumer Two years 1. Electronic Two years One year
Electronics Mechanic
2. Mechanic Two years One year
Consumer
Electronics
35. Industrial Two years 1. Electronic Two years One year
Electronics Mechanic
2. Mechanic Two years One year
Communication
Equipment
Maintenance
36. Electronics Two years 1. Electronic Two years One year
Instrument & Mechanic
Measurement
37. Trouble Two years 1. Electronic Two years One year
Shooting of Mechanic
Electronics
Equipment 2. Mechanic Two years One year
Communication
Equipment
Maintenance
38. Electroplatin Two years 1. Electroplater Two years One year
g
39. General Two years 1. Fitter Two years One year
Fitter cum
Mechanic
40. Mechanical Two years 1. Fitter Two years One year
Technician
41. Mechanical Two years 1. Fitter Two years One year
Engineering
42. Interior One year 1. Interior Designer Two years One year and
Decoration and Decorator six months
and
Designing
43. Interior CAD Two years 1. Interior Designer Two years One year
Operator and Decorator
44. Machinist Two years 1. Machinist Two years One year
45. Mechanical Two years 1. Machinist Two years One year
Engineering
46. Mechanical Two years 1. Machinist Two years One year
Technician
47. Machinist Two years 1. Machinist Grinder Two years One year
Grinder
48. Maintenance Two years 1. Maintenance Two years One year
Mechanic Mechanic
Chemical Chemical Plant
Plant
49. Hotel One year 1. Food Production Two years One year and
Management (General) six months
and Catering
Technology 2. Food Production Two years One year and
(Vegetarian) six months
3. Steward One year and One year
three months
50. Cookery One year 1. Food Production Two years One year and
Technician (General) six months
2. Food Production Two years One year and
(Vegetarian) six months
51. Food One year 1. Food Production Two years One year and
Processing (General) six months
2. Food Production Two years One year and
(Vegetarian) six months
3. Steward One year and One year
three months
52. Food Two years 1. Food Production Two years One year
Processing (General)
Technology
2. Food Production Two years One year
(Vegetarian)
3. Steward One year and One year
three months
53. Catering and Two years 1. Food Production Two years One year
Restaurant (General)
Management
2. Food Production Two years One year
(Vegetarian)
3. Steward One year and One year
three months
54. Foundryman One year 1. Foundryman Two years One year and
six months
55. Electronics One year 1. Mechanic Two years One year and
Technology Communication six months
Equipment
Maintenance
56. Mechanic of One year 1. Mechanic Two years One year and
Industrial Communication six months
Electronics Equipment
Maintenance
57. Basic One year 1. Mechanic Two years One year and
Electronics Communication six months
Engineering Equipment
Maintenance
58. Mechanic One year 1. Mechanic Two years One year and
DTH / Communication six months
Communicati Equipment
on System Maintenance
59. Industrial Two years 1. Mechanic Two years One year and
Electronics Communication six months
Equipment
Maintenance
60. Troubleshoot Two years 1. Mechanic Two years One year and
ing of Communication six months
Electronics Equipment
Equipment Maintenance
61. Automobile One year 1. Mechanic Repair Two years One year and
Engineering and Maintenance six months
of Vehicle
2. Mechanic Motor One year and One year
Cycle three months
3. Mechanic Diesel Two years One year and
six months
62. Mechanic One year 1. Mechanic Repair Two years One year and
Auto and Maintenance six months
Engineering of Vehicle
2. Mechanic Motor One year and One year
Cycle three months
3. Mechanic Diesel Two years One year and
six months
63. Diesel One year 1. Mechanic Repair Two years One year and
Mechanic and Maintenance six months
of Vehicle
2. Mechanic Diesel Two years One year and
six months
64. Auto Two years 1. Mechanic Repair Two years One year
Engineering and Maintenance
Technology of Vehicle
2. Mechanic Motor One year and One year
Cycle three months
3. Mechanic Diesel Two years One year
4. Mechanic Motor Two years One year
Vehicle
65. Auto Two years 1. Mechanic Repair Two years One year
Engineering and Maintenance
Technician of Vehicle
One year and One year
2. Mechanic Motor three months
Cycle
3. Mechanic Diesel Two years One year
4. Mechanic Motor Two years One year
vehicle
66. Mechanic Two years 1. Mechanic Repair Two years One year
Motor and Maintenance
Vehicle of Vehicle
One year and
2. Mechanic Motor three months One year
Cycle
Two years
3. Mechanic Motor One year
Vehicle
67. Basic Two years 1. Mechanic Two years One year
Refrigeration Refrigeration and
and Air Air Conditioning
Conditioning
68. Industrial Two years 1. Mechanic Two years One year
Refrigeration Refrigeration and
and Air Air Conditioning
Conditioning
69. Air Two years 1. Mechanic Two years One year
Conditioning Refrigeration and
and Air Conditioning
Refrigeration
Technician
70. Automobile Two years 1. Mechanic Auto Two years One year
Electronics Electrical and
Electronics
71. Installation Two years 1. Mechanic Medical Two years One year
Maintenance Electronics
and Service
of Medical
Equipment
72. Water Supply Two years 1. Plumber Two years One year
and Sanitary
Engineering
2. Pump Operator Two years One year
cum Mechanic
3. Sanitary Hardware One years and One year
Fitter three months
73. Pump Two years 1. Plumber Two years One year
Operator cum
Mechanic
2. Pump Operator Two years One year
cum Mechanic
3. Sanitary Hardware One years and One year
Fitter three months
74. Mechanic One year 1. Sheet Metal Two years One year and
Technology Worker six months
75. Sheet Metal One year 1. Sheet Metal Two years One year and
Worker Worker six months
76. Mechanic al Two years 1. Sheet Metal Two years One year
Engineering Worker
2. Turner Two years One year
77. Mechanic al Two years 1. Sheet Metal Two years One year
Technician Worker
2. Turner Two years One year
78. General Two years 1. Sheet Metal Two years One year
Fitter cum Worker
Mechanic
79. Construction Two years 1. Surveyor Two years One year
Surveyor
80. Turner Two years 1. Turner Two years One year
81. CNC Turning Two years 1. Turner Two years One year
82. Fabrication One year 1. Welder (Gas and One years and One year
(Fitting and Electric) three months
Welding)
83. Production One year 1. Welder (Gas and One years and One year
and Electric) three months
Manufacturin
g
84. Structural One year 1. Welder (Gas and One years and One year
Fabrication Electric) three months
and Repairs
Technology
85. General Two years 1. Welder (Gas and One years and One year
Welding Electric) three months
86. Welding Two years 1. Welder (Gas & One years and One year
Technology Electric) three months
87. Welding Two years 1. Welder (Gas and One years and One year
Fabrication Electric) three months
and
Automation
88. Weld Testing Two years 1. Welder (Gas and One years and One year
and Quality Electric) three months
Management
89. Welding Two years 1. Welder (Gas and One years and One year
Technique Electric) three months
90. Structure and Two years 1. Welder (Gas and One years and One year
Fabrication Electric) three months
91. Electrical Two years 1. Wireman Two years One year
Wiring
Estimation
and Costing
92. Repair and Two years 1. Wireman Two years One year
Rewinding of
Electrical
Domestic
Appliances
93. Repair and Two years 1. Wireman Two years One year
Rewinding of
Electric
Motors
94. Lineman Two years 1. Wireman Two years One year
95. Hospitality One year 1. House Keeper One years and One year
(Hotel) three months
2. Steward One year and One year
three months
96. Facility One year 1. House Keeper One years and One year
Management (Hotel) three months
2. Steward One year and One year
three months
97. Hospitality Two years 1. House Keeper One years and One year
Management (Hotel) three months
2. Steward One year and One year
three months
98. Institutional Two years 1. House Keeper One years and One year
House (Hotel) three months
Keeping
2. Steward One year and One year
three months
99. Hospitality Two years 1. House Keeper One years and One year
Management (Hotel) three months
In Offices
One year and One year
2. Steward three months
100. Basic of Two years 1. House Keeper One years and One year
Hospitality (Hotel) three months
Industry
Management 2. Steward One year and One year
three months
101. Fashion One year 1. Dress Maker One years and One year
Design and three months
Jewelry
Textile
102. Garments One year 1. Dress Maker One years and One year
Manufacturin three months
g and
Fashion
Designing
103. Apparel One year 1. Dress Maker One years and One year
three months
104. Sewing One year 1. Dress Maker One years and One year
Science three months
Teacher
105. Sewing One year 1. Dress Maker One years and One year
Cloth three months
Dressing
Teacher
106. Fashion Two years 1. Dress Maker One years and One year
Designing three months
and
Clothing
Constructio
n
107. Commercial Two years 1. Dress Maker One years and One year
Garment three months
Designing
and Making
108. Fashion Two years 1. Dress Maker One years and One year
Garment three months
Making
109. Clothing for Two years 1. Dress Maker One years and One year
Family three months
110. Master of Two years 1. Dress Maker One years and One year
Tailoring three months
111. Clothing of Two years 1. Dress Maker One years and One year
Embroidery three months
2. Surface One years and One year
Ornamentation three months
Techniques
(Embroiderer)
112. Fashion Two years 1. Dress Maker One years and One year
Merchandisi three months
ng and
Production
113. Fashion Two years 1. Dress Maker One years and One year
Technology three months
114. Profession Two years 1. Hair and Skin One years and One year
al Carer three months
Beautician
115. Creative One year 1. Leather Goods Two years One year and
Design and Maker six months
Pattern
Cutting 2. Footwear Maker Two years One year and
six months
116. Leather One year 1. Leather Goods Two years One year and
Footwear Maker six months
2. Footwear Maker Two years One year and
six months
117. Footwear Two years 1. Leather Goods Two years One year
Technolog Maker
y Two years One year
2. Footwear Maker
118. Manufactu Two years 1. Leather Goods Two years One year
ring of Maker
Leather Two years One year
Goods 2. Footwear Maker
119. Leather Two years 1. Leather Goods Two years One year
Manufactu Maker
ring Two years One year
2. Footwear Maker
120. Bakery One year 1. Baker and Two years One year and
and Confectioner six months
Mithaikala
121. Bakery One year 1. Baker and Two years One year and
and Confectioner six months
Confection
ery
Technician
122. Bakery Two years 1. Baker and Two years One year
and Confectioner
Confection
ery
Manageme
nt
123. Desk Top Two years 1. Desk Top Two years One year”.
Publishing Publishing
Technique Operator
SCHEDULE-II
(See rule 4)
Standard of physical fitness for training
(1) A candidate should be free evidence of any contagious or infectious
disease. He should not be suffering from any disease which is likely to be
aggravated by service or is likely to render him unfit for service or endanger the
health of the public. He should also be free from evidence of tuberculosis in any
form, active or healed.
(2) Height, Weight And Chest
Candidates should satisfy the following minimum standards, namely:-
HEIGHT: 137 centimeters; Weight:25.4 Kilogram; Chest expansion should
not be less than 3.8 centimeters irrespective of size of chest:
Provide that where a candidate does not satisfy the said minimum
standards but is certified in writing by a Medical Officer not below the rank of
an Assistant Surgeon (Gazetted), to be physically fit for being engaged as an
apprentice in a particular trade under the Apprentices Act,1961, he may be
engaged as an apprentice in that trade.
(3) EYES
There should be no evidence of any morbid condition of either eye of the lids of
either eye which may be liable to risk of aggravation of recurrence.
Standard of Vision
(A) Visual acuity: *Candidates having vision in one eye shall eligible to undergo
apprenticeship training except in the following seventeen trades, namely :-
(1) Electrician Aircraft (2) Watch and Clock Mechanic
(3) Driver cum Fitter (4) Surveyor
(5) Process Cameraman (6) Sirdar
(7) Rigger(Engg. & Chem. Industry) (8) Shortfirer/Blaster(Mines)
(9) Mate(Mines) (10) Mech. Radio & Radar Aircraft
(11) Ceramic Moduler (12) Ceramic Caster
(13) Ceramic Kiln Operator (14) Ceramic Press Operator
(15) Ceramic Modeller (16) Ceramic Decorator
(17) Optical worker
* Substituted vide GSR 221 dated 21st April 1993
(b) Colour vision: Not required
(4) EARS
Hearing must be good in both ears and there should be no sign of suppurative
disease. No hearing aid shall be permitted.
(5) SKIN
There should be no evidence of acute or chronic skin disease or chronic
ulceration.
(6) SPEECH:
Speech should preferably be without impediment.
(7) ALIMENTARY SYSTEM:
1. Candidates should have sufficient number of natural teeth (in healthy state)
for mastication.
2. Spleen should not be palpably enlarged and there should be no evidence
of tenderness in the splenic area.
3. Liver should not be palpable or tender.
4. There should be no oral sepsis.
5. There should be no sugar in the urine.
6. Candidates should not be suffering from haemorrhoids, fissures in
and testis anal hernia or bubonocele or ischio-rectal abscess or hydrocele.
(8) CARDIO VASCULAR SYSTEM:
1. Blood pressure should not exceed 85 diastolic and 140 systolic.
2. Candidates with low blood pressure (i.e. systolic below 100) should be
rejected.
3. There should be no sign of any cardiovascular disease.
(9) RESPIRATORY SYSTEM:
Candidates should be free from all diseases of respiratory system. There
should be no deformity of chest which may cause impediment to breathing.
(10) GENITO URINARY SYSTEM
There should be no evidence of genito urinary disease or any abnormality.
(11) SKELETAL SYSTEM:
1. The function of all limbs should be within normal limits.
2. There should be no evidence of serious deformity of the spinal column or
of the extremities.
(12) NERVOUS SYSTEM:
There should be no evidence of any disease of nervous system or of any
mental disease.
(13) GLANDULAR SYSTEM:
There should be no evidence of tuberculosis or other disease of the glandular
system including the endocrine glands.
SCHEDULE-IIA
(See rule 5)
S. Name of State/ Union Ratio of Scheduled Caste Ratio of Scheduled Tribe
No. territory apprentices to the total apprentices to the total
apprentices in designated apprentices in designated
trade trade
1. Andhra Pradesh 1:7 1:15
2. Arunachal Pradesh --- 1:2
3. Assam 1:15 1:9
4. Bihar 1:7 1:100
5. Chattisgarh 1:9 1:4
6. Gujarat 1:15 1:7
7. Goa 1:50 1:8
8. Haryana 1:5 ---
9. Himachal Pradesh 1:4 1:25
10. Jammu and Kashmir 1:12 1:9
11. Jharkhand 1:9 1:4
12. Karnataka 1:7 1:15
13. Kerala 1:10 1:100
14. Madhya Pradesh 1:7 1:5
15. Maharashtra 1:10 1:11
16. Manipur 1:33 1:3
17. Mizoram --- 1:2
18. Meghalaya --- 1:2
19. Nagaland --- 1:2
20. Odisha 1:7 1:4
21. Punjab 1:4 ---
22. Rajasthan 1:6 1:8
23. Sikkim 1:20 1:5
24. Tamil Nadu 1:5 1:100
25. Tripura 1:6 1:3
26. Telangana 1:16 1:32
27. Uttar Pradesh 1:5 1:100
28. Uttarakhand 1:6 1:3
29. West Bengal 1:5 1:20
30. Andaman and Nicobar --- 1:13
Islands
31. Chandigarh 1:6 ---
32. Dadra and Nagar 1:50 1:2
Haveli
33. Delhi 1:6 1:13
34. Daman and Diu 1:3 1:11
35. Lakshadweep --- 1:2
36. Puducherry 1:7 ---
Schedule–III
(See rule 14)
FORMAT-1
Model Contract of Apprenticeship Training for Major/Minor* Apprentices
Photograph
of
Apprentice
1. Name and address of establishment : _____________________
with Tel. no., Fax No. and E-mail address _____________________
_____________________
2. (a) Name of apprentice (Block Letters) : _____________________
(b) Father’s/Mother’s /Husband’s Name : _____________________
3. Address of apprentice : _____________________
_____________________
4. Gender (please √) : Male/Female/Transgender
5. Date of birth : ___________________
6a) Whether belongs to SC/ST/OBC/PwD/Minority : Yes/No
(please √ )
b) Name of the category : _____________________
7. Educational Qualification
(a) Academic Qualification : _____________________
(b) Technical qualification :
(i) Name of the Trade or Course : _____________________
(ii) Duration of Training or Course : From ______ To _______
(iii) Name of the Institute or College : _____________________
(iv) Name of the Council or University :_____________________
8. (a) Date of execution of contract : ____________________
(b) Age on the date of execution of contract : ____________________
9. Name of the trade for which apprentice is for : ____________________
apprenticeship training
10. (a) Duration of apprenticeship training : ____ years _____months
(b) Period of apprenticeship training : From _____ To _______
11. Rates of Stipend: The minimum prescribed stipend per month to be paid by the
employer to apprentice
(a) During 1st year of training : Rs. __________________
nd
(b) During 2 year of training : Rs. __________________
rd th
(c) During 3 and 4 year of training : Rs. __________________
12. (a) Name and address of Guardian : _____________________
(in case of apprentice is minor)
(b) Relationship with the apprentice : _____________________
13. Name and Address of the Surety : _____________________
_____________________
14. We, the Employer, Apprentice or Guardian** and the Surety solemnly declare that
we have read the Apprentices Act, 1961 and the Apprenticeship Rules, 1992
regarding the contract of apprenticeship training including obligations and agree to
abide by all the provisions made thereunder. In case of default by the either the
apprentice or the employer, we agree to compensate the other party as per the
provisions of the Apprenticeship Rules, 1992 (Main Provisions of the Rules may
be seen in the Enclosure).
____________ ____________ __________________ ____________
Signature of the Signature of Signature of Guardian** Signature of
Employer with seal Apprentice Surety
15. Name of Witnesses with their Address
(1) _______________________________
(2) _______________________________
***16. Contract Registration Number : _____________________
(To be given by the Office of the Apprenticeship Adviser)
* Minor apprentice is an apprentice who has not completed eighteen years of age.
** Guardian, in case of minor apprentices
*** Mandatory only for designated trades
Enclosure to Contract of Apprenticeship Training
The main provisions of the Apprenticeship Rules relating to the Contract of
Apprenticeship Training are -
1. The employer shall pay stipend per month to the trade apprentices at the minimum
rates (as per the provision of sub-rule(1) of rule 11 of the Apprenticeship Rules,
1992)
(a) During 1st year of training : Seventy per cent. of minimum wage
of semi-skilled workers notified by
the respective State or Union
territory
(b) During 2nd year of training : Eighty per cent. of minimum wage
of semi-skilled workers notified by
the respective State or Union
territory
(c) During 3rd and 4th year of training : Ninety per cent. of minimum wage
of semi-skilled workers notified by
the respective State or Union
territory:
Provided that in the case where the minimum rate of wage for a trade is not
notified by the State Government or Union territory, then, the maximum of minimum
wages of the Scheduled Employment notified by such State Government or Union
territory for semi-skilled workers shall be taken into account for paying the stipend in
respect of that trade:
Provided further that in the case of trade apprentices referred to in clause (a)
of section 6 of the Act, the period of training already undergone by them in a school or
other institution recognised by the National Council, shall be taken into account for the
purpose of determining the rate of stipend payable”.
2. The employer shall pay stipend per month to the Graduate, Technician and
Technician (Vocational) apprentices at the minimum rates (as per the provisions of sub-
rule (2) of rule 11 of the Apprenticeship Rules, 1992)
(a) Graduate Apprentices : Rs. 4984
(b) Sandwich Course : Rs. 3542
(Students from Degree Institutions)
(c) Technician Apprentices : Rs. 3542
(d) Sandwich course : Rs. 2890
(Students from Diploma Institutions)
(e) Technician (Vocational) Apprentices : Rs. 2758
3. The stipend prescribed for graduate apprentices shall be paid by the employer to
those apprentices who possess a degree of minimum three years duration after
10+2 system of education and undergoing apprenticeship training in optional trade.
4. The stipend prescribed for technician apprentices shall be paid by the employer to
those apprentices who possess a diploma of three years after 10th class or diploma
of two years after 12th pass and undergoing apprenticeship training in optional
trade.
5. The stipend prescribed for technician (vocational) apprentices shall be paid by the
employer to those apprentices who possess a certificate in vocational course
involving two years of study after completion of secondary stage of school
education and undergoing apprenticeship training in optional trade.
6. The stipend prescribed for trade apprentices shall be paid by the employer to all
other apprentices undergoing apprenticeship training in optional trade according to
their period of apprenticeship training.
7. The stipend for a particular month shall be paid by the tenth day of the following
month. No deduction shall be made from the stipend for the period during which
an apprentice remain on leave as observed in the establishment.
8. Where the Contract of Apprenticeship is terminated through failure on the part of
the employer in carrying out the terms and conditions of the Contract (as notified
under the Apprenticeship Rules, 1992), he shall pay to the apprentice such
compensation as may be provided by the Central Government.
9. In the event of premature termination of Contract of Apprenticeship for failure on
the part of apprentice to carry out the terms and condition of the contract (as
notified under the Apprenticeship Rules, 1992), the surety at the request of
apprentice hereby guarantees to employer the payment of such amount as
determined by the Apprenticeship Adviser as and towards the cost of training.
10. The liability of the surety is limited to an amount of two thousand five hundred
rupees with interest at twelve per cent. per annum
FORMAT- 2
Proforma of Work Diary
Name and Address of Establishment :
Name of Apprentice :
Trade :
Registration Number :
Serial Number Date (Week) Competencies covered during the Signature of
week Supervisor
From To
Note: The list of competencies to be indicated as laid down in the course of trade.
The work diary shall be maintained by the Apprentice and countersigned by his
supervisor once a week.
FORM APPRENTICESHIP
RECORD OF PROGRESS OF APPRENTICE :
(To be submitted once in a quarter in respect of graduate or technician or technician
(vocational) apprentices)
(1). Name of Apprentice………………………………..
(2). Registration Number ........................................…......
(3). Subject field in Engineering or Technology or Vocational Course............................
(4). Under training at ...……………………………..........................................................
(5). Date of commencement of training..
(6). Area of training during the quarter .........................................................................
(7). Progress report for quarter .......................... to .............................…………...
(i) Aptitude for training ________________________________________________
(ii) Performance during the quarter ________________________________________
(iii) Shortcomings, if any________________________________________________
(iii) Reaction of trainee to corrective action at (iii)
above___________________________
(v) Assessment:-
Excellent/Above Average/Average/Below Average
(Strike out those not applicable)
Signature of Officer/Executive In-charge of Training
Remarks
Signature of Manager of the Industry/Establishment.”
SCHEDULE-IV
(See Rule 9)
1. In case of Trade Apprentices;-
(a) Must possess a degree or diploma in engineering or technology or
equivalent qualification recognised by Government of India.
(b) National Apprenticeship Certificate with minimum five years
experience.
2. In the case of Graduate Apprentices:
Must hold a degree in engineering or technology or equivalent qualification
as recognised by the Government of India.
3. In the case of Technician and Technician (Vocational) Apprentices:-
Must hold degree or diploma in engineering or certificate in Vocational
courses or equivalent qualification recognised by the Government of India.
4. The person placed in over all charge of training of apprentices may be
assisted by such number, as is considered necessary, of shop floor or
workshop personnel who have practical know how to guide the apprentices.
It is desirable that the person in charge should have industrial experience.
5. Desirable qualification in the case of 1,2 and 3 above :
Training in Central Staff Training and Research Institute/Technical
Teacher Training Institute/Central Training Institute.
*SCHEDULE IV A
(See rule 9 A)
I STAFFING PATTERN
(a) BASIC TRAINING CENTRE
1. One Trade Instructor for every 16 apprentices
2. One Drawing Instructor for every 150 apprentices
3. One Instructor for every 150 apprentices
(W/Shop Calculation and Science)
4. One Social Study Instructor for every 400 apprentices
(b) SHOP FLOOR TRAINING INCLUDING RELATED
INSTRUCTIONS
1. One Trade Instructor for every 40 apprentices
2. One Drawing Instructor for every 150 apprentices
3. One Instructor for every 150 apprentices
(W/Shop Calculation and Science)
II QUALIFICATIONS OF INSTRUCTIONAL STAFF FOR BASIC
TRAINING CENTRE AND SHOP FLOOR TRAINING
INCLUDING RELATED INSTRUCTIONS.
TRADE INSTRUCTOR/ DRAWING INSTRUCTOR/ WORKSHOP
CALCULATION AND SCIENCE INSTRUCTOR
Essential: (a) (i) Passed 10th standard
(ii) Passed National Apprenticeship Certificate
Examination in relevant trade with five years
experience in industry.
OR
(b) Diploma in Engineering/Technology in appropriate branch
with three years experience.
Desirable : Passed Instructor Training Course in relevant trade from any
of the Advanced Training Institute or Central Training
Institute for Instructors under the Directorate General of
Employment and Training, Ministry of Labour.
____________________________________________
* Inserted vide GSR 190(E) dated 26th Feb. 1999
SCHEDULE-V
(See Rule 6)
I. Obligations of Employer (both in the case of Major and Minor Trade
Apprentices. (Under section II of the Apprentices Act,1961)
1. The employer shall make suitable arrangements in the workshop for
imparting a course of practical training to the apprentice in accordance
with the programme approved by the Central/State Apprenticeship
Adviser and the syllabus approved by the Central Government in
consultation with the Central Apprenticeship Council.
2. The employer shall release the apprentice for receiving related
instructions as required by section 10 of the Apprentices Act. 1961,
treating any time spent in attending such classes as part of his paid
period of work.
3.(a) The employer shall pay stipend to the apprentice at the rate as
specified from time to time under rule II of the Apprenticeship
Rules 1992.
(b) The stipend for a particular month shall be paid by the 10th day of the
following month. No deduction shall be made from the stipend for the
period during which the apprentice remains on casual or medical
leave. Stipend shall, however not be paid for the period for which the
apprentice remains on extraordinary leave.
4.(a) The weekly hours of work of an apprentice while undergoing
practical training shall be as follows :
(i) The total number of hours per week shall be 42 to 48 hours
(including the time spent on related instructions);
(ii) Apprentice during basic training shall ordinarily work for 42
hours per week including the time spent on related
instruction;
(iii) Apprentice during the second year of apprenticeship shall
work for 42 to 45 hours per week including the time spent
on related instructions;
(iv) Apprentice during the third and subsequent years of
apprenticeship shall work for the same number of hours per
week as the workers in the trade in the establishment in
which the apprentice is undergoing apprenticeship training: of
hours per week as the workers in the trade in the
establishment in which the apprentice is undergoing
apprenticeship training:
Provided, however, that short term apprentice may be
engaged to work upto a limit of 48 hours per week.
(b) No apprentice other than a short term apprentice, shall be engaged on
such training between the hours of 10 p.m. and 6 a.m. except with the
prior approval of the apprenticeship Adviser who may give his
approval if he is satisfied that it is in the interest of the training
of the apprentice or in public interest.
(5). Where the contract of apprenticeship is terminated on account of
failure on the part of the employer to carry out the terms and
conditions of the contract, he shall pay to the apprentice or his
guardian (in the case of a minor) compensation in accordance with the
rates as specified under rule 8 of the Apprenticeship Rules, 1992.
(6) The employer shall allow to the apprentice such holidays as are
observed in the establishment.
(7) If personal injury is caused to an apprentice by accident arising out
of and in the course of his training as an apprentice, the employer
shall pay to the apprentice compensation in accordance with the
provisions of the Workmen Compensation Act, 1923, subject to the
modifications specified in the Schedule to the Apprentices Act,1961.
II. Obligations of Trade Apprentice (both in case of Major and Minor Trade
Apprentices )
(Under Section 12 of Apprentices Act.1961).
(1) The apprentice shall abide by the rules and regulations of the
establishment in all matters of conduct and discipline and carry out
all lawful orders of the employer and superiors in the establishment.
(2) The apprentice shall conduct himself as a trainee and not as a worker,
learn his trade conscientiously and diligently and endeavour to qualify
himself as a skilled Craftsmen in his trade before the expiry of the
period of training. Save as provided in the Apprentices Act. 1961
provisions of any law with respect to Labour will not be applicable to
him.
(3) The apprentice shall attend practical (basic and shop-floor
training and related instructions) classes regularly.
(4) The apprentice shall appear for periodical tests that may be conducted
by the employer or other authorities concerned by the National
Council for Vocational Training for award of a certificate of
proficiency in the trade.
(5) In the event of premature termination of contract of apprenticeship
for failure on the part of the apprentice to carry out the terms and
conditions of contract, the surety or the guardian may be bound to pay
the employer such amount as may be determined by the Central/State
Apprenticeship Adviser as and towards the cost of training in
accordance with rates as specified under rule 8 of the Apprenticeship
rules,1992.
(6) Except in case of extreme urgency the apprentice shall submit
applications for all leave except medical leave to the appropriate
authority and obtain sanction before the leave is taken.
(7) The apprentice, his/her guardian (in case of minor) declares that
no other contract of apprenticeship subsists already between him
and any other employer (in respect of minor apprentice, by the
guardian) and undertake that he shall not enter into any other contract
of apprenticeship with any other employer (in respect of minor
apprentice, by the guardian) before the expiry or termination of the
contract of apprenticeship.
(8) The apprentice or his/her guardian (in case of minor) shall not enter
into any other contract of apprenticeship with any other employer in
respect of the apprentices mentioned in the first recital before the
expiry or termination of the contract of apprenticeship.
(9) The first six months of the period of apprenticeship training shall
be treated as period on probation. Either party may make as
application to the Central/State Apprenticeship Adviser for the
earlier termination of contract and when such an application is made
the party making the application shall send by post a copy thereof to
the other party to the contract. The Central/State Apprenticeship
Adviser after considering the contents of the application and
objectives, if any, filed by the other party, may terminate the contract,
if he is satisfied that the parties to the contract, if any, of them
have or has failed to carry out the terms and conditions of the contract
and that it is desirable in the interests of the parties or any of them
to terminate the same. Provided that the amount as stated in paras I(6)
and II(5) of this schedule shall become payable by one party to the
other accordingly as the failure is on the part of the employer or the
apprentice:
Provided further that no compensation shall be payable by the
employer to the guardian of the apprentice if the employer to the
guardian of the apprentice if the employer makes an application
to the Central State Apprenticeship Adviser during the period the
apprentice is on probation for the termination of the contract on the
ground that the apprentice on the trade in which he has been engaged
and that his guardian has refused to allow him to undergo
apprenticeship training in another designated trade for which he is
found suitable by the employer and if the Central/State
Apprenticeship Adviser, after considering the contents of the
application of the employer and the objections, if any, filed by the
other party is satisfied that it is desirable in the interests of the
parties or any of them to terminate the contract.
(10) It shall not be obligatory on the part of the employer to offer any
employment to the apprentice on completion of period of his
apprenticeship training in his establishment nor shall it be obligatory
on the part of the apprentice to accept an employment under the
employer:
Provided that if there is any recruitment, employer shall
formulate its own policy for recruiting any apprentice who has
completed the period of apprenticeship training in his establishment in
terms of sub-section(1) of section 22 of the Act”;
(11) Any disagreement or dispute between the employer and the guardian
of the apprentice arising out of the contract shall be referred to the
Central/State Apprenticeship Adviser, for decision and any person
aggrieved by the decision of the Central State Apprenticeship Adviser,
may within 30 days from the date of communication to him of such
decision, prefer as appeal against the decision to the Central/State
Apprenticeship Council and such appeal shall be heard and
determined by the Committee of that Council appointed for the
purpose. The decision of such Committee shall be final.
SCHEDULE VI
(See rule 6)
TERMS AND CONDITIONS OF THE CONTRACT OF APPRENTICESHIP
FOR GRADUATE TECHNICIAN AND TECHNICIAN (VOCATIONAL)
APPRENTICES.
1. The period of training shall be one year (in the case of Sandwich students,
the period of training shall be stipulated in the curriculum).
2. It shall not be obligatory on the part of the employer to offer any employment
to the apprentice on completion of period of his apprenticeship training in his
establishment nor shall it be obligatory on the part of the apprentice to accept
an employment under the employer:
Provided that if there is any recruitment, employer shall formulate its
own policy for recruiting any apprentice who has completed the period of
apprenticeship training in his establishment in terms of sub-section(1) of
section (22) of the Act
3. Every apprentice undergoing apprenticeship training in an establishment shall
be a trainee and not a worker and as such the provisions of any law with
respect to Labour shall not apply to or in relation to such apprentice.
4 (i) The apprentices shall abide by the rules and regulations of the
establishment in all matters of conduct and discipline and safety and carry out
all lawful orders of the employer and superiors in the establishment.
(ii) The apprentice shall learn his subject field conscientiously and diligently
and attend to practical and instructional classes regularly.
(iii) The apprentice shall maintain a record of his work during the period of
his apprenticeship training in a proforma approved by the Apprenticeship
Adviser.
(iv) Where the contract of apprenticeship is terminated for failure on the part
of the apprentice to carry out the terms of contract, the apprentice shall
refund to the employer as cost of training such amount as may be determined
by the Apprenticeship Adviser. In such event, the apprentices shall not be
entitled to enter into another contract of Apprenticeship under the Act with
any other employer.
(v) The contract of apprenticeship can be terminated without compensation
payable to the apprentices:-
(a) If he/she secures gainful employment(on production of copy of the
appointment order); and
(b) If he/she is unable to continue training on medical grounds (on
production of a certificate to this effect from a Medical Officer not
below the rank of Civil Surgeon).
(vi) For breach of contract by the employer, the employer shall pay
compensation to the apprentice in accordance with rates specified under rule
8 of these rules.
(vii) Continuance of payment of stipend shall depend on satisfactory performance
of the apprentice during the training period.
5(i) The employer shall make suitable arrangement in his establishment for
imparting a course of apprenticeship training to the apprentice in
accordance with the provisions of the Act and rules made thereunder and with
the approval of the respective Regional central Apprenticeship Adviser.
(ii) Every employer is required to formulate a "Training Programme" for the
training of Graduate/Technician (Vocational) Apprentices and get it
approved by the respective Regional Central Apprenticeship Adviser.
(iii) The employer will arrange for a suitable person to be placed in charge of
training of apprentices as laid down under the Act and the rules made
thereunder.
6(i) A Graduate, Technician and Technician (Vocational) Apprentice shall work
according to the normal hours of work of the department in the establishment
to which he or she is attached for training
(ii) The stipend for a particular month shall be paid before the 10th day of the
following month.